-
Anonymous users2024-01-24Knock it out and make it waterproof, rinse it with water. It is required to be free of oil, dust, gravel and other impurities.
JS composite waterproof coating is used as the main material for waterproof construction. The material is developed by improving the patented technology of Japan, and is a two-component water-based waterproof coating made of polymer emulsions such as acrylates and inorganic powders such as cement, which has a high-performance waterproof effect and is a new type of building waterproof material that can form an overall waterproof coating film with good strength and elasticity. This material is a two-component waterproof coating composed of organic liquid material and inorganic powder; It not only has high elasticity of organic materials, but also has good durability of inorganic materials, can be constructed on wet substrates, is non-toxic, harmless and non-polluting, and can be formulated into a color surface layer.
The above answer comes from the official website of Jiacheng Waterproof.
-
Anonymous users2024-01-23After knocking off the floor tiles, level the ground with mortar, do a good job of slope slope floor drain, and then coat the waterproof layer and paint it into the floor drain to ensure that the water will not leak down when there is water in the bathroom. Pay attention to protect the waterproof layer from damage, and you can also use another layer of protective mortar. And then just put the bricks on it.
-
Anonymous users2024-01-22It has been knocked off and re-done waterproof and re-paved, this time I hope it will be in place at one time!
-
Anonymous users2024-01-21In order to prevent water leakage, the bathroom must be covered with a waterproof layer, and the floor tiles should be laid after the waterproof layer is completed.
-
Anonymous users2024-01-20There's no way, let's find a way to make a waterproof layer, there are expensive ones that can be smeared, ugly, but effective.
-
Anonymous users2024-01-19I can help you out, no need to knock out the bathroom.
Explain that the water pipe in the bathroom is leaking and the water pipe is damaged, you can check your water meter, be sure that your water meter is turning, and see if there is any wet place on the surrounding wall. Find the leakage of the water pipe, open the place to see what the problem is, ask the plumber to deal with it, and it is best to test the pressure after treatment to see if there is any problem in other places.
1 To disassemble the bathroom ceiling to find out the cause of the leakage, many of them are broken water pipes and leaks (it is best to find a regular waterproof company to find out the cause first). >>>More
If the waterproofing is not done well, you can't see the appearance. Whether there are seams in the floor tiles has nothing to do with waterproofing. >>>More
I don't know how many waterproofs you have done in your home, generally two, mainly the bathroom leaks, and the kitchen generally does not leak, because the washing sink and washing machine have special sewer pipes. The first waterproofing of the bathroom is very important, that is, the blank (there is only one water inlet pipe and a drainage pipe when you just receive the house) paint it with a good waterproof material, after drying, put it full of blisters for ten days, and make a mark, after ten days, see if there is an obvious downward trend in the water marks, and observe whether there are any traces of water leakage on the top of the bathroom downstairs. The second course is all such as basins, urinals, etc. >>>More
Problem: As soon as the renovation of the new home was completed, the bathroom was made like a big tearful face by the sewage leaking from the roof of the shed. How can I avoid this from happening? >>>More