Is it okay to make waterproofing membranes in the toilet?

Updated on Toilets 2024-08-10
5 answers
  1. Anonymous users2024-01-24

    Toilet waterproofing can be done with coatings and waterproofing membranes.

    Among them, waterproof coatings are easy to construct, so anyone can say that they can do it. But in reality, the effect is not satisfactory. Moreover, due to the wide variety of waterproof coatings at present, the quality varies greatly, it is recommended that when selecting waterproof coatings for construction, the node parts (such as around the pipe, yin and yang corners, and the joint parts of the wall and the floor) should be additionally strengthened, and the number of brushing times should be 3-5 times.

    The most commonly used waterproofing membrane for toilet waterproofing is polyethylene polypropylene waterproofing membrane, which is constructed with special adhesives.

    When it is not possible to master the skill level of the workers, it is recommended to use polyethylene polypropylene coils.

  2. Anonymous users2024-01-23

    Don't be so troublesome, the ground and wall brush three times waterproof paint on it, as long as the workers don't cut corners, do a 24-hour closed water test after drying, don't leak it, look at the best downstairs owners downstairs is also on it.

  3. Anonymous users2024-01-22

    It's okay, but it's a bit cumbersome to operate, and it's better to use liquid waterproof material.

  4. Anonymous users2024-01-21

    Langfang area of Hebei is about 20 bars It doesn't seem very suitable for this location with such a material, right?? The material fee is generally 15Add 20 labor

  5. Anonymous users2024-01-20

    Yes, this is quite suitable for the kitchen, because the height of the kitchen waterproof is not as high as the bathroom, but it is not suitable for the bathroom, because the waterproof membrane will be folded and easy to penetrate.

Related questions
1 answers2024-08-10

It is recommended to use waterproof coatings, the root of the SBS membrane construction pipe is easy to leak, and then there is the SBS membrane 10 square meters per roll you can't use, too wasteful.

1 answers2024-08-10

Yes, this method used to be this (three sticks and two oils) was asphalt, and now it has been eliminated, and the construction is more troublesome态--

4 answers2024-08-10

No, the asphalt will crack at low temperature and will not play a waterproof role.

1 answers2024-08-10

Filling with cinder is a common way to fill when decorating, economical, the cinder is lighter, and the size is small and has a certain hardness, it is easy to fill tighter while filling, and the most used material in the decoration of the pit, some people also use the building slag to fill the wall, or the construction slag and the carbon slag are mixed, as long as the filling is good, it is generally no problem to manage for decades.

2 answers2024-08-10

No.

Asphalt is brittle at low temperatures and prone to cracks. >>>More