-
Anonymous users2024-01-24Using 12 types of single brick masonry, the area is 4,32 square meters, 64 red bricks are needed per square, a total of 276 pieces are needed, according to the weight of each brick 33 kilograms, a total of 828 kilograms, the current load-bearing design of the building is generally 1 square 200 kilograms, according to this calculation method is completed!
-
Anonymous users2024-01-23What is the main thing to do?
Is it because the bathroom is too low?
If there is no settling tank, most of the pipes in the bathroom cannot be changed, and if you want to install squatting stool, you can only build a step in the house, which is very unsightly.
The biggest advantage of the settling pool bathroom is that the pipeline can be changed, and the position of the sanitary ware can be adjusted according to the needs of the owner, and it is beautiful, but the construction is also quite difficult, and there are two problems that are easy to appear, first, the ground sinks after backfilling and causes the ground to crack, second, the ground subsidence causes the ground to waterproof and crack, if your home is the settling pool bathroom, don't worry, these two problems have already been thought of by the decoration company to find a solution, Dongyi Risheng's settling pool bathroom anti-cracking patent technology, The problem of cracking can be solved fundamentally, by painting the waterproof layer at the bottom, and laying the steel mesh at the same time to solve the problem of cracking.
From this floor plan alone, it is impossible to determine whether it is a sunken restroom.
If you are going to install a squatting toilet in the upstairs bathroom, you must have a settling tank, otherwise the installation is not beautiful, it is inconvenient to use, and it will also take up space. There is no need to install a toilet.
The toilet settlement 340 is to install the drainage pipe, the final ground will only be 20mm lower than the ground in other rooms, the toilet is installed on the ground, so as long as the drain pipe mouth of the toilet is enough distance from the wall (about 400mm), the toilet installation is no problem.
Hello, of course, it is made of ceramsite, which is a void structure, and the volume is larger than that of cement mortar of the same weight, so on average, the quality of ceramsite of the same volume is lighter, which will not increase the weight of the toilet and prevent sagging. Moreover, ceramsite absorbs water and odor, and will not cause cracking of the bathroom floor, which is the preferred material for bathroom backfilling. taobao BRIC cultural bricks.