-
What must be done, the process of waterproofing the bathroom.
1. Brush the waterproof paint for the first time. Before construction, ensure that the construction site is clean and dry, and the waterproof coating should be coated with no omission, firmly combined with the base layer, no cracks, no bubbles, and no falling off. The coating height is consistent, and the thickness should meet the requirements of the product.
2. Brush the waterproof paint for the second time. Note the first.
First, the second waterproof coating needs to have a certain time interval, and the second time can only be carried out after the first coating is dry, and the specific time depends on the coating. If the interval is too short, the waterproof effect will be greatly reduced.
3. Lay a protective layer. In order to prevent the subsequent construction from damaging the waterproof layer, it is necessary to lay a protective layer on the surface of the waterproof coating. The protective layer should be completely covered with the waterproof layer, no omission, firmly combined with the base layer, no cracks, no bubbles, and no falling off.
-
Try to do all the waterproofing, if the side near the exterior wall is not waterproofed, it will be a problem with the exterior wall decoration, and it may also seep downstairs or next door. Don't let the small be the big one.
-
I tried my best to do it, but I didn't do a good job of waterproofing. Now the exterior walls are cracked and peeling. Ok good house ready for rent.
-
I think it's better to do it, don't wait for a long time to regret it, isn't Gorja three coats and one cloth, this is very good.
The exterior wall of the bathroom (the master bedroom and the small hallway near the bathroom) seeps water to see if there is a discharge of water pipes, if there is, you must first check it, find the original leakage, and repair it thoroughly. >>>More
1 There are no drawings at all, and the specific situation of the scene cannot be seen, and there are several possibilities for this seepage: >>>More
Yes, it is better to clean after applying.
Have a great day! >>>More
The waterproofing of the inner wall of the bathroom should generally be meter-2 meters high. Therefore, the exterior wall generally does not need to be waterproofed.
1 All 1Pressure the water pipe first, and then the hot water pipe should also be used to prove that the water pipe is fine. >>>More