How to reasonably design a bathroom with a length of two meters and a width of one meter and a half

A small square bathroom can be designed according to the following.

When designing the bathroom, there are actually many aspects that we need to consider, first of all, whether there is only one bathroom in the home, whether this bathroom needs to put a washing machine, and whether the sewer pipe of this bathroom needs to be changed. Such as:If there is only one bathroom in the house, then the space of the bathroom is very tight, because it has to go to the toilet, wash your face and wash your clothes at the same time. If this is the case, then you need to pay attention to these things when designing your restroom.

If the sewer pipe in the bathroom is in the center, then the door of the bathroom can be opened on one side, and the bathroom can be arranged in an L-shape. For example, when you enter the door, you will have a washbasin, then a toilet, and finally a shower room. A washing machine can also be placed opposite the toilet, and if it is arranged in this way, then it can meet all the needs of the family, and to a large extent, it is actually separated from wet and dry.

But the only drawback is that the shower room may be very small, but the shower will come out after taking a shower, so this disadvantage can also be ignored. The other is that the toilet is located at the back of the bathroom, so the first thing we see when we open the door is the washbasin, then the washing machine, and finally the shower room and toilet. If this is the case, then the space left for the washbasin in the whole bathroom is very large, and the toilet position next to the shower room will be very crowded.

In fact, no matter what the case is, I think both designs are very good, and both achieve dry and wet separation. Although the size of the shower room is relatively small, it is very well done compared to the three-square-meter bathroom.

The design of the bathroom is mainly to isolate dry and wet, and make a small shower room if the area is small.

The easiest thing is to find a professional designer to design a reasonable one.

The bathroom should do a good job of dry and wet partitions, and waterproofing is the most important thing.

I think you can design the bathroom to be dry and wet.

In this case, you tell the decorator your general requirements, and he will design it for you.

The bathroom with a length of two meters and a width of one meter and a half is still relatively large, how convenient and how to come.

I think I still need to go to the door to see the structure of the room to know how to design it.