I want to move a wireless router to the living and dining room

The problem is quite complicated, mainly because the description is not clear! Let's take it one step at a time!

1. There are cats, basically you can judge that you are ADSL dial-up Internet access, if not, when I didn't say it below.

2. If it is the ADSL of the telecom, connect the telephone line to the cat. You don't need to teach this.

3. Connect the cat to the wireless router with a data cable. You don't need to teach this, how did you connect it before, but how do you still connect it now.

4. The data cable panel is available in ordinary hardware stores (note that you want to buy a data cable panel, not a telephone line panel), there is a bayonet inside, and there are 8 line positions, peel off the pre-laid broadband cable, there are 8 lines inside, and the line position corresponding to the access panel according to the color, be careful not to connect the wrong one. 8. 4 threads, 4 full colors, 4 half colors.

5. The panel of the pre-laid data cable in the master bedroom is also operated in the same way as in the previous step.

6. You need to connect the wired output port of the router to the panel of the pre-laid data cable in the living room. Use a single cable. Generally, computer stores sell finished products (rice or 3 meters).

You can also ask someone to do it, and there are generally places that sell data cable crystal heads to help people make data cables. Tell him that he is connected to the router and not directly to the computer.

7. A data cable is also required to connect from the panel in the master bedroom to your console. The steps are the same as above.

8. In this way, your host can be connected to the router by wire.

If you find it troublesome, buy a USB wireless receiver and plug it directly into the host, so that you don't need to wire.

It's a bit troublesome to wiring by yourself, it is recommended to use wireless all on it, the host is desktop, and it costs dozens of dollars to buy a desktop wireless network card!

There's a network cable to connect the cat and then connect the route in the connection host and it's OK hehe.

Broadband interface to connect to the cat The network cable out of the cat is connected to the WAN port of the router Now there is the kind of thing on the Internet that can transmit the network cable signal through the home power cord There are more than 100 on Taobao.