-
Anonymous users2024-01-24Only dismantling repairs or adding lines are carried out.
The layout of hydropower projects is all arranged through dark lines, which is to put it bluntly, in the wall, in the ceiling, etc.;
Problems in the later stage can only be repaired according to the situation of the site, and whether it needs to be dismantled depends on the actual situation of the site to be determined;
Therefore, in the decoration, water and electricity are hidden projects; It is the category that owners pay the most attention to and worry about the most, so you need to find a good decoration company or construction team leader or plumber master to avoid trouble in the later stage.
-
Anonymous users2024-01-23First of all, the roof is dark, how strange the electrician you are looking for!
The next thing to solve the problem, is it threaded? If you wear it, if you don't wear the pipe, find the thread that enters the roof, pinch it off, and re-walk the bright line in the ceiling If this doesn't work.
Just open the wall for repair, and then restore it when you're done!
Yes.
But you have to use a casing. >>>More
To put it simply, the difference between a bright line and a dark line is whether it can be seen or not. That is to say, the dark line is invisible, for example, when decorating, the wire is hidden in the wall, or set on the ceiling, and the wire is not visible after the decoration, it is called "dark line"; On the other hand, if you can see the wire normally, even if it is covered with a pipe or trunking on the outside, as long as you can see the conduit or trunking, it is an "open wire".
Calculate the center point of the ceiling first. Calculate the radius of the garden. (Don't say how to measure) wire saw. Plug the roof and hang it. It's best to find a carpenter. By the way, take a good look at the crystal lamp you want to buy.
Generally, the pipe is 3-5 cm in diameter, and the distance between the boom and the boom is 60-80 to catch the pipe, pay attention to the fixed pipe, pad a little waste paper or cotton cloth outside the pipe, so as not to puncture the pipe and cause water leakage.
If it is a range hood smoke exhaust, it is all into the integrated ceiling and then the wall hole discharge, to be beautiful, you can go to the stainless steel production shop for dozens of yuan to customize a decorative frame set in the middle of the range hood and the integrated ceiling decoration, you can not see the smoke pipe. If it is a ventilation fan, it must also be on the ceiling, so it is beautiful!