-
Anonymous users2024-01-24The slope is the ratio of the height of the slope to the horizontal distance of the slope, which is the tan value of the slope angle, which is expressed by a percent sign. The slope on the balcony should be in the direction of drainage.
Let's see what others have to say.
-
Anonymous users2024-01-23For example, your balcony is 100m long.
Slope from one end to the other.
Then the vertical height difference between the two ends is 100*
Is it a duplex? There should be two elevations, reinforced on different elevation maps, and there is no reinforcement in the living room in the construction diagram.
Yes, half of the area marked on the drawings has been reduced from the construction area, balconies, corridors, etc., and there are corresponding calculation rules in the relevant specifications and quotas. However, it is best to review the area on the drawings when budgeting the project, raise any doubts to the design, and communicate with the design to make design changes if necessary.
Presumably, it should be the area. Balcony send half so divide by 2.
In fact, there is no need to use Tianzheng, it is OK to represent the direct line, if you must use Tianzheng to draw the railing of the floor plan, you can use Tianzheng [Staircase Other] menu to draw the balcony, after the balcony is drawn, the plane shows two parallel lines, in fact, it is the railing projection, you use the 3DO command to view, color vision style, concept, and find that it has been painted with the railing.
As long as the house is ventilated, light and ventilated, and whether the first feeling of entering the house is comfortable. Nothing else matters.