-
No, you don't. You can lead it out. Make a switch. Turn it off if you want. No need to open the box.
-
Use two power strips, one in the weak current box, and one on the power panel near the sofa, so that you can control the routing cat and other devices in the weak current box.
-
Buy a circuit remote control and it's solved.
-
Just power off.
-
What is the weak current box and what does it have to do with the router?
You can put it anywhere, and the router can be placed reasonably to achieve the maximum range of use, depending on the room type and use point.
If the weak current box is connected to the living room with a network cable, buy a switch and put it in the weak current box, and the router in the living room connects the switch through the network cable.
First of all, you need to have a network cable from the weak current box to the living room, and then connect the cable in the weak current box that was originally plugged into the router to this cable connected to the living room. In this way, the router can be used directly when it is plugged into the living room and plugged into the Internet cable.
Personally, I recommend not to lead the lead to the head of the bed, it is very unsightly, even if you walk the dark line to the head of the bed, you always have to pull it out, right? It is recommended to use a wireless router if the landlord has to use a wired form, it is recommended to go directly from the routing lead of the weak current box to the head of the bed, if your computer and the bed are in the same room, you can wear two wires at a time, and the thickness of the wire pipe left by the general decoration should be no problem! This eliminates the need for a switch to the computer's location! >>>More
Whether the network cable and your door (the weak current box where the cat and the router are connected) can not move, find a cable in the living room, and connect the end of the weak current box with the crystal head at 2 ends and connect it to the cat. >>>More