Ask for help in the weak current wiring scheme of the new house decoration living room, bedroom, stu

1. If the study computer and the living room are shared, you only need to install a high-definition HDMI interface on the study wall and the living room wall (but you need to buy a computer graphics card with HDMI output and an HDTV with HDMI interface in the future).

2. If you have independent wired Internet access, you can configure the route in the weak current box of the home, and then install a network card interface in each room, and all the lines can be finally summarized to the home routing (not to mention wireless, you can replace the wired with a wired and wireless dual-function route).

3. You'd better ask a dedicated intelligent wiring company to do this thing, because you have to have an independent control system in each room, which will be more complicated.

4,There are two access schemes for digital TV,Through network cable,Or through the existing cable TV access,These two interfaces can be collinear after being summarized at the weak current box at your entrance,The problem is not big (if the cable network is occupied by digital TV in the future, you can use wireless,No need to repeat the wiring,Waste of resources)Satellite TV is generally realized through the cable TV interface,You leave a wired interface at the balcony where you put the pot lid,Then wiring to the living room wall to transcoder。 (If you want every TV to have satellites, it's more troublesome, you want each TV to be equipped with a decoder, otherwise you have to run to a place to press the remote control on a decoder, then you have to leave an interface behind each TV, and then transfer it to the pot lid, so you don't have to buy multiple pot lids).

PS,In fact, you just need to consider that these things are enough for yourself in the future (such as you watch high-definition movies,Are you using a computer graphics card to output it to the motor from the Internet or watching it with digital TV),After all, the renovated house will be used for more than ten years,And the new technology has been changing,You can't do it all at once,Finally,Here is just a rough idea,And weak electricity now has a special intelligent wiring company to do,Plumbers are impossible to understand these, At most, I will help you lay a telephone line network cable, even if there is a level (if he understands, he will not only be a plumber), so it is recommended that if you have high requirements, it is best to ask the intelligent wiring company to help you make this system, which will be more safe, otherwise it will not be used after it is done, and it will not be lost often.