-
Anonymous users2024-01-24Pay attention to hygiene before any JS or K11 construction, and pay attention to the density of the waterproof layer during construction.
-
Anonymous users2024-01-23In the case of a caisson bathroom, remember to do secondary drainage, so that there is no water in the bathroom.
-
Anonymous users2024-01-22It's Yuhong! There's nothing to pay attention to, the tiler will help you get it done.
Bathroom waterproofing is generally 2-3 layers, bathroom waterproof steps: >>>More
Step Method Do a good job in the maintenance of the car at the grassroots level Normally, the ground is a cement mortar surface, and there are some special circumstances, such as the pipeline is not buried, and the ground is uneven, so the base should be smooth, the surface should be smoothed and calendered, solid, and there should be no hollowing, sanding, cracking, etc., and the moisture content of the base should meet the construction requirements of waterproof materials, not more than 9%. The flooding slope of the screed should be 2%, and the slope of 5% (1 20) should be wiped out at the root of the pipe against the wall to avoid water accumulation here. Pipe roots and floor drains that protrude from the floor and walls. >>>More
The new house decorates the bathroom to do waterproofing, which belongs to the work of the plasterer, and has nothing to do with the plumber, if you want the plumber to do it, it must be charged separately.
1. Bathroom waterproof construction steps.
Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Bathrooms are waterproof.
BAI method: du >>>More