-
Anonymous users2024-01-24It is down, it is impossible to rise and it cannot remain unchanged, because this buoy is to control the water ingress, and you will know that if it is broken, the water will exceed the position of the buoy and cause the toilet to keep leaking. And when it's good, you'll see that the water level is always around its scale, and you can throw a turn or lower the buoy to control the amount of water, because if you turn your head and throw it in, the water storage is actually quite small.
-
Anonymous users2024-01-23The question is simple.
According to the principle of F1L1=F2L2. That is to say, the force arm * force = resistance arm * resistance arm because the lever in the toilet is not an equal lever with the strength arm.
Therefore, if the arm becomes shorter, it is difficult for the float to stop the water control valve.
The opposite is the opposite! Rise. This is because more buoyancy is required to close the water valve.
-
Anonymous users2024-01-22The valve may not close tightly. The water level will drop.
-
Anonymous users2024-01-21It has nothing to do with the water level, and it is likely that it is not closed tightly due to the small torque.
-
Anonymous users2024-01-20The water level will drop.
But it has nothing to do with the fact that the valve is not closed tightly.
-
Anonymous users2024-01-19The actual water level in the tank will rise.
The float in the flush toilet is the function of controlling the liquid level. The principle is to use the lever principle to open or close the water supply valve. If the middle rod is broken, if it is made of plastic material, stick it with 502 glue or 101 glue, and dry it for a period of time. >>>More
In real life, everyone will encounter a lot of problems, just like the toilet at home, find that everyone feels the float in the toilet, how does it work? Its principle, the working principle is that when you use the toilet handle press down, after the water goes out to use, the toilet needs to be injected with new water, he can be injected into the toilet tank through the faucet, and then in the process of water storage, the float will grasp your water level, has reached the required water level, the float will lift its switch to the rise, after the rise, the other side of his connection will be the water place to watch, so its principle is to say that it plays a closed role, The float floats through the water and floats up to the other side of the float, and at the switch on the other side, he closes it.
One end of the crossbar of the float is fixed on the column of the water tank, it may be that the fixed screw is too tight, which affects the activity of the crossbar, so that the float can not float when the water level is full, you only need to loosen the screw a little, and the crossbar can move up and down freely.
You don't need to change it, just stick it up.
It must be in the upper middle position, huh? The float is mainly used to control the height of the water consumption of the water tank.