-
Anonymous users2024-01-24The float in the flush toilet is the function of controlling the liquid level. The principle is to use the lever principle to open or close the water supply valve. If the middle rod is broken, if it is made of plastic material, stick it with 502 glue or 101 glue, and dry it for a period of time.
Note: When using 502 glue or 101 glue, it is best to reinforce both sides with thin plastic sheets, and also glue them, so as to ensure the tensile strength.
-
Anonymous users2024-01-23It's almost like a lever. The float also controls the valve of the tap water to control the amount of water coming out.
If it is broken, it will not work with 502 like glue. The pressure of the water is high. It's okay to use it once or twice, but it will definitely break down after a while. It's better to go straight to buying a new part.
-
Anonymous users2024-01-22The float only plays a role as a lever, and the middle one is broken, and sticking it with 502 glue will not affect the drainage and water discharge.
One end of the crossbar of the float is fixed on the column of the water tank, it may be that the fixed screw is too tight, which affects the activity of the crossbar, so that the float can not float when the water level is full, you only need to loosen the screw a little, and the crossbar can move up and down freely.
You don't need to change it, just stick it up.
Tie it up with a rope and you can continue to use it. Otherwise, go outside and buy a water piece and put it on.
In real life, everyone will encounter a lot of problems, just like the toilet at home, find that everyone feels the float in the toilet, how does it work? Its principle, the working principle is that when you use the toilet handle press down, after the water goes out to use, the toilet needs to be injected with new water, he can be injected into the toilet tank through the faucet, and then in the process of water storage, the float will grasp your water level, has reached the required water level, the float will lift its switch to the rise, after the rise, the other side of his connection will be the water place to watch, so its principle is to say that it plays a closed role, The float floats through the water and floats up to the other side of the float, and at the switch on the other side, he closes it.
Check the following reels for rust or something tangled.