-
If you can change it during the warranty period, if you go out of the warranty period, you should be broken at the float connecting rod, as long as you replace this part, but the market is to buy a complete set (not expensive), first close the water inlet angle valve below to control the water ingress.
-
Find a nearby repairer to go to your house and see it in 5 minutes.
-
It's just that there is a problem with the inlet valve that you pressed in your hand.
And maybe that water level has been raised.
-
Check to see if it's an installation problem, if not, change it quickly.
-
Hurry up and find a manufacturer to change, it is estimated that there is trachoma in the ceramic production, which can be returned!
-
Whoever you buy the toilet from!
Your question is relatively simple, and I suggest you go and check it out here. >>>More
Two scenarios.
1. There is a crack in the water tank, the water leaks outside, and there is a welding torch that can melt the resin to weld glass ceramics, etc. >>>More
A leaky toilet base is a troublesome thing, and I need to understand here whether the leaking toilet base you are talking about is a leaky new toilet or an old toilet. The treatment of a new toilet and an old toilet is definitely not the same. Under normal circumstances, if the toilet is broken, if it is still in the warranty period, it is to find after-sales service for repair, and if the warranty period is over, you have to deal with it yourself. >>>More
How to deal with a leaky toilet:
1.Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More
The switch of the float valve is broken, and if you can't solve it, you can find a pipe master!