-
Anonymous users2024-01-24I took the subject 2 S curve method The clutch must be pressed, and slowly just enter the right side of the S curve. When the left head of the left side of the car is aligned with the right side of the S curve, the left head slides along the right side of the S curve, when the left head leaves the right side of the S curve, immediately observe the distance between the body and the left side of the S curve in the left mirror, adjust the steering wheel so that the distance between the body and the left side of the S curve is guaranteed to be 30 cm, and the left rear wheel can be guaranteed not to press the line at this time; When the right side of the front of the right side of the car is aligned with the left side of the S curve, hit the steering wheel to the right, the right front of the car slides along the left side of the S curve, when the right front leaves the left side of the S curve, immediately observe the distance between the body and the right side of the S curve in the right mirror, adjust the steering wheel so that the distance between the body and the right side of the S curve is guaranteed to be 30 cm, at this time, the right rear wheel is not pressed and the S curve is smoothly exited. S Curve Skills Detailed Steps 1, the vehicle drives to the curve driving test area.
Voice prompt in the car: The next test item is driving on a curve, please start - it has entered the curve) 2. When entering the S curve, pay attention to the position of the front of the car, try to make the outer front wheel of the vehicle close to the right side of the curve, and move forward with 1 and a half gears, and do not stop during the advance. While moving forward, you should also observe the left and right rearview mirrors so that the vehicle is driving along the S curve.
3. Turn to the left: the vehicle is driving close to the right, when the left corner coincides with the right edge line, the direction is to the left to make a circle, and at the same time fine-tune the direction, so that the left corner and the right edge line basically coincide, turn left along the S road, and the vehicle will not press the line or out of the line. After passing the left turn, prepare to turn right.
4. Turn to the right: When the left corner slowly finishes the right edge line of the left turn, the direction is kept still, and when the right vertex of the head cover touches the left edge line of the right turn, return to the right direction and walk forward slowly for a while. 5. When you see the left side of the hood 1 3 and the left edge line of the right turn touch, make a circle of direction to the right, and fine-tune the direction at the same time, so that the right corner and the left edge line of the right turn basically coincide, turn right along the S road, and the vehicle will not press the line or out of the line.
6. Out of the corner: When the vehicle drives out of S road and the front of the car is aligned with the exit, quickly return to the right direction and continue to drive out of the curve driving test area.
The solution to the toilet brush end broken in the toilet is: contact a professional toilet master in time to deal with the problem, and avoid more serious blockage caused by self-treatment. >>>More
Find a wire, bend a small hook over your head, and put it in the toilet, maybe you can hook it out.
2.Pour hot water into the toilet, scald the brush, and hook it out; 3. >>>More
It's still very difficult, the common materials are plastic, and the melting temperature is still relatively high, and the room temperature is still not reached.
What should I do if the toilet brush head is partially broken in the toilet? If you can't see it, you can't touch it, ask for a big move, thank you. >>>More