What should I do if the toilet brush end is broken in the toilet?

2.Pour hot water into the toilet, scald the brush, and hook it out; 3.

If you really can't take it out, you can only ask a professional to deal with it, and don't deal with it yourself, causing a more serious blockage.

Hope it helps, dear

1. Straighten it with a wire or hanger with a certain toughness, bend the head into a hook shape, and reach in to hook the brush;

2. Squeeze repeatedly with a toilet suction pump, pull it up vigorously when the suction cup is sucked up, and suck the brush out;

3. Ask a pipeline dredging professional to solve it.

The factors that cause a clogged toilet are:

1. Improper installation: such as the bottom outlet is not aligned with the sewer, the bottom screw hole is sealed, the water level of the water tank is low, and the flushing effect is affected.

2. Caused by improper use: such as pouring food residues such as bones into the toilet, not cleaning the hair into the toilet, lazily pouring sand and gravel into the toilet during decoration, etc., may cause blockage;

3. Toilet quality problems: the diameter of the sewer pipe is 50 mm, which is too small to flush the dirt and affect the water sealing effect.

AbstractIf you can also see the head of the toilet brush, you can use a long clip to clip the toilet brush head out; Or put a plastic bag over your hand and take out the toilet brush head.

What should I do if the toilet brush end is broken in the toilet?

If you can also see the head of the toilet brush, you can use a long clip to clip the toilet brush head out; Or put a plastic bag over your hand and take out the toilet brush head.

If the toilet brush head has already entered the pipe, it is recommended that you have a plumber use the tool to remove the toilet brush head.

Hope mine can help you

If the toilet brush head is broken in the toilet, you can try the following:

1. First determine where the card is.

2. Try to press the drain with the rubber head part of the leather puff, and pull it up vigorously to form a vacuum, and see if it can be pulled out!

3. Find a soft rattan and iron wire (not easy to break, and can be bent, anyway, the toughness should be good material) to try;

4. If the wire can't be hooked, you can try to bring a long-sleeved glove to go in and feel out!

5. If the above methods have been tried without success, you can directly ask a professional toilet master to help you take it out!

The solution to the toilet brush end broken in the toilet is: contact a professional toilet master in time to deal with the problem, and avoid more serious blockage caused by self-treatment.

If you can't take out the toilet brush, you can ask a professional to deal with it without damaging the toilet. If the toilet brush head is blocked inside the toilet, you can wear non-slip gloves and put your hand into the toilet bowl and pull out the toilet brush. If you can't pull it out with your hands, you can choose to scald it with hot water, soften the toilet brush, and hook it out.

Pour a pot of boiling water into the toilet bowl and press the flush, the hot water can soften the bristles of the plastic toilet brush, and you can easily reach into the toilet bowl and remove the toilet brush. Or use a disassembled drying rack with the head hooked and hook the toilet brush out.

1. First determine where the card is. (Understand the sewage pipe of the toilet) 2. Try to press the drain with the rubber head part of the leather puff, and pull it up vigorously to form a vacuum to see if it can be pulled out!

3. Find a soft rattan and iron wire (not easy to break, and can be bent, anyway, the toughness should be good material) to try;

4. If the wire can't be hooked, you can try to bring a long-sleeved glove to go in and feel out!

5. If the above methods have been tried without success, you can directly ask a professional toilet master to help you take it out!

First take a wire to see if you can take it out, if not, find a decoration to spend about 100 yuan to dismantle the toilet from the bottom on the line, (the material to buy yourself, just buy a bottle of glass glue on the line) at most an hour to take out the toilet brush, but your family at least one day don't use the toilet, wait for the glass glue to dry before using it!

Because if you make it yourself, it's nerve-wracking and laborious, and it's not good, it's not a job in the hands of their professionals, and there's a big S-shaped elbow inside the toilet, so it's impossible for you to get through from the front. Only the toilet was dismantled.

Put a plastic waterproof one on your hand, put your hand in and grab the brush head for a second and come out.

Oh my God, you're a god!

<> can only go out and buy this Dongdong, try, see if you can clip it out, there is a clip in front of this Dongdong, manually control the switch of the clip, clip out the best.