Pls the flush toilet flushes out the water is blue, what is added Thanks

Updated on Toilet 2024-07-17
5 answers
  1. Anonymous users2024-01-24

    Toilet cleaners have been added to the toilet.

    Toilet cleaner is a solid containing detergent, flavor, disinfectant, put the toilet cleaner in the water tank behind the toilet, the toilet cleaner will slowly dissolve in the water, and achieve the effect of cleaning the toilet bowl every time you flush the water.

    How to use: 1. Remove the cardboard packaging on the outside of the toilet cleaner, and leave the film (which can be melted in water).

    2. Remove the lid of the water tank behind the toilet.

    3. Throw a piece of toilet cleaning treasure with film into the water tank.

    4. Close the lid of the water tank, wait for 20 minutes for the toilet cleaner to slowly melt and release, and then press the flush button.

    5. At this time, the water flushed out of the toilet is blue.

  2. Anonymous users2024-01-23

    It should be a toilet cleaner, and when you put it in the toilet tank, it turns blue.

  3. Anonymous users2024-01-22

    1. Buy a blue, the size of a wife's cake in the shopping mall, and put it in the water tank for a month, the principle is to turn the water in the toilet tank into clean and deodorized water, which is completely effective!

    2. Buy the kind of "car fragrance wind" fragrance box used for deodorization in the car, open it to be fragrant, and the effect is very good; If you want to save a little, buy the kind that you can add.

  4. Anonymous users2024-01-21

    This is the case with the toilet cleaner (automatic flushing toilet cleaning block).

  5. Anonymous users2024-01-20

    The toilet tank was added with Mr. Wittmann.

Related questions
1 answers2024-07-17

The cause of the water spray is the blockage of the sewage pipe. >>>More

1 answers2024-07-17

There is a germicidal disinfectant, which is blue. Perhaps, this is what your toilet in your house looks like.

1 answers2024-07-17

There are two main flushing methods on the market. One is the direct flush type, which uses the momentum of water to directly discharge the sewage. The other is the jet siphon type, which is under the condition of atmospheric pressure, using the siphon action formed by the flushing water in the drainage channel, and with the help of the water flow sprayed out by the jet hole under the water seal, the sewage discharge is accelerated. >>>More

11 answers2024-07-17

1. You can increase the amount of water, such as putting bottles in the water tank. >>>More

1 answers2024-07-17

No suction is because the pressure of your water pipe is too small, the solution is to put a brick in the toilet tank, or if your toilet is installed with a pressure reducing valve, you can adjust the size of the pressure reducing valve. >>>More