-
Anonymous users2024-01-24There are two main flushing methods on the market. One is the direct flush type, which uses the momentum of water to directly discharge the sewage. The other is the jet siphon type, which is under the condition of atmospheric pressure, using the siphon action formed by the flushing water in the drainage channel, and with the help of the water flow sprayed out by the jet hole under the water seal, the sewage discharge is accelerated.
Jet siphon is a further flushing method on the basis of general siphon.
There are also in-line and S-bend, but the best one is the siphon type, which flushes cleanly.
As shown in the experiment, when the coarse straw is placed over the thin straw and inserted vertically into the water and raised slightly, the coarse and thin straws form a special siphon, and the water continues to flow down the thin pipe. Flush toilets also make use of the principle of siphons.
How to deal with the broken flush valve of the flush toilet: Grab the total drain and rotate counterclockwise or there are two small plastic cards in the shape of 7 on the left and right of the bottom of the drain, and grab the end of the figure 7 and pull it up with your hand. If you can't repair it yourself, ask a professional master to repair it, ask a professional master to repair it. >>>More
Method 1: Place drink bottles or bricks in the toilet bowl to reduce the amount of flush water. >>>More
1. Before the installation of the toilet, check whether there is any blockage of sediment and debris in the sewage pipe, and whether the installation ground is level. >>>More