What to do if the Marco Polo flush toilet keeps filling with water

Every city has, there are many models of toilet accessories, and there will be different models of general plumbing accessories, you can take a picture, and buy it at the place where you buy accessories

There are two reasons why the toilet flush is weak, 1. There is a blockage in the water pipe, 2. The water pressure of the water tank is not enough, so adjust the height of the float. Yaguangya reminds that if this is the case at the beginning, it is estimated that you are buying a siphon toilet, and it may have been displaced because of the inappropriate hole spacing; Or there are two reverse bends, one for the toilet and one for the sewer pipe. If it is because it is a long time later, it may be that the sewer pipe is not good, it may be blocked, or there is dirt in the tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling.

Of course, the float is too high and has to move down, because the water pressure is too high; Or it is the water inlet, there is a foreign body, resulting in the water can not be sealed, there is running water, and after a long time, the toilet water level is high, so that it continues to leak. Method: Rotate the water inlet control lever of the toilet counterclockwise, clean the foreign object, and then screw it clockwise. Yaguang Ya experts reminded that if the toilet still keeps coming out, the tank accessories are broken, and you can just change the accessories.

It's been running water, right?

Open the lid of the water tank and push the top of the water outlet up with your hands, a plug will fall off and block the water mouth. >>>More

It may be a leak in the pipeline, or it may be doped with gas in the inlet water. You should find a property to check and repair.