-
Anonymous users2024-01-24First of all, there is a large gap in the longitudinal and transverse wood conditions, which can be adjusted slightly. If the horizontal strip is short, contact the manufacturer to make a new one; If the installation is not standardized, the door needs to be removed and reinstalled, and there is no problem when the general solid wood composite door is installed two or three times.
As for the remaining materials for installation, you can check whether there are still matching window covers, dumb mouths, and baseboards that have not been installed? If not, it is estimated that all that is left is leftovers.
For the installation process of the solid wood composite door you mentioned, it is roughly to install the door sleeve first, and then install the door leaf. If the door meets the installation specifications, then there is no need to cut corners.
The above information is provided by TATA Wooden Door.
-
Anonymous users2024-01-231. Find a supplier to replace the material, which is basically irremediable, and will leave sequelae even if it is treated, 2. The remaining scraps are generally normal 3. The flatness of the building door opening must be handled well before the general installation of the door, and only in this way can the firmness of the door be guaranteed after installation
Solid wood composite door, there is a layer of material similar to MDF in the board, which contains a large amount of glue, which is pressed by adding a large amount of glue at the end of the scrap crushing, and the main component of the glue is formaldehyde, and the incubation period of formaldehyde is as long as ten years. It's only been two months, and only a small part of it has been released. In addition, there are other substances that can emit odors, such as the presence of hydrobenzene in the paint.
There are many such doors, not to mention being deceived (it depends on how much money you buy) composite doors are generally solid wood composite substrates around the MDF, and then the surface is painted or veneered. >>>More
There is a paint film on the surface of the solid wood floor, if the scratch part is shallow, you can use polishing wax to polish it, and then wipe it clean. If the wound is deep, it can be filled with solid repair wax, then painted with a touch-up pen and polished. If you find this cumbersome, you can buy a bottle of floor wax and wipe it down like a normal mop, and some scratches that are not particularly deep can be treated. >>>More
If it is white, it is estimated that it will be yellowed in the future, as for the time, it depends on what paint the factory uses, and it is estimated that it will be yellowed after the year.
While the thickness of the plate on the surface of the door can't be used as an indication alone, at least the product is not the same as the sample, and you can ask the supplier to explain it. You can apply for a return, or let it give a certain compensation, otherwise you will resolutely return the goods.