-
Anonymous users2024-01-24There are many such doors, not to mention being deceived (it depends on how much money you buy) composite doors are generally solid wood composite substrates around the MDF, and then the surface is painted or veneered.
Most doors are edge-banded on 4 sides, which means that the upper and lower sides are not closed.
In general, the doors you buy belong to the low-to-medium grade.
You don't have to do anything, you can't handle it, just use it.
However, this is not directly equated with not being environmentally friendly, if there is no problem with the material, such a door can also be environmentally friendly.
-
Anonymous users2024-01-23What brand.
1. The top and bottom of the door should be topped with primer and topcoat at worst 2. The four sides of the door leaf are MDF in line with the composite door process.
3. Environmental protection does not mean that artificial plates are polluting. Natural timber is also polluted. Such as: marble has radiation. As long as it is a national index range, it is acceptable.
4. Analysis, not being deceived. It is a small factory with poor quality and technology.
-
Anonymous users2024-01-22I make paint, and generally the domestic middle and low end are like this, but the export is different.
Yes, but be sure to pay attention to the color difference! Otherwise, the color can't match, it's ugly! It is recommended to have a wooden door in the bedroom, and you must choose an environmentally friendly and healthy Shimufang healthy wooden door! The quality is good, the price is not expensive, and the cost performance is very high!
Solid wood composite door, there is a layer of material similar to MDF in the board, which contains a large amount of glue, which is pressed by adding a large amount of glue at the end of the scrap crushing, and the main component of the glue is formaldehyde, and the incubation period of formaldehyde is as long as ten years. It's only been two months, and only a small part of it has been released. In addition, there are other substances that can emit odors, such as the presence of hydrobenzene in the paint.
Haha, oil mixing is also called sealing paint method, the door made by this method has a good texture, and the surface is smooth, the feel is good, and almost all of them are solid colors. The clear oil is also called the open paint method, the door made by this method is more stable, and the surface can see the texture of wood, which is mostly used for heavier colors. If you are younger, it is recommended that you choose oil-mixing, which is simply the kind of solid color that cannot see the wood grain, because it is more fashionable and better matched with the style and color of the furniture; If you are older and prefer a calm feeling, it is recommended that you choose the clear oil, that is, the kind that can see the texture, it is mostly black walnut or brown in color, but pay attention to the color coordination when matching furniture.
Personally, I also feel that the market demand for solid wood composite doors is the largest. The solid wood composite door with good workmanship quality has the characteristics of good stability, heat preservation, sound insulation, flame retardant and impact resistance. >>>More
1. If there is cracking in all newly renovated solid wood floors, the first thing to consider is whether the quality of the floor is a problem. The usual reason is that the solid wood floor blank has not been dried, or the drying treatment is not in place, resulting in a high moisture content of the finished floor. As the water evaporates after the new pavement, cracking is inevitable (sooner or later). >>>More