-
Anonymous users2024-01-24Use a percussion drill to make two 6 mm small holes in the ceiling, use expansion screws to put the ceiling 4-lamp bath bomb where the ceiling is located (the ceiling should be scraped flat), and the exhaust pipe must be used open pipe, this kind of installation is simple and practical, and the shortcomings are not beautiful.
If you want to make a scaffold, you can do it.
-
Anonymous users2024-01-23Yes, Dawei brand bath bomb bracket, dual-purpose on the top of the wall, adjustable angle, priced at 8 yuan 1 pay, including expansion bolts, screws, advanced stamping and baking paint technology, telephone; 0635，7998023。Shandong Liaocheng, nationwide delivery.
-
Anonymous users2024-01-22OK. MAKE A BRACKET, DECORATE THE BRACKET WITH PLASTIC GUSSET OR WOOD CORE BOARD AND PLYWOOD ON ALL SIDES, USE 110MM PVC PIPE AS EXHAUST VENTILATION PIPE, AND USE 16MM OR 20MM FLAME RETARDANT PIPE AS CONDUIT. Economical, aesthetically pleasing.
-
Anonymous users2024-01-21As a support, be careful of mist and water droplets on the back of the bath bomb.
-
Anonymous users2024-01-20Use the impact drill Xihong to make two 6 mm small holes in the ceiling, use the expansion screw to put the ceiling type 4 lamp bath bomb where the ceiling is located (the ceiling should be scraped flat Lu Xiang), and the state pulse exhaust pipe has to use open pipes, this kind of installation is simple and practical, and the shortcomings are not beautiful.
If you want to make a scaffold, you can do it.
It is also possible to install ventilation fans and bath bombs without suspended ceilings, so you can choose a ventilation fan and bath bomb device installed on the wall. >>>More
Yes, the price of the integrated ceiling is relatively high, it is not cost-effective, it is generally recommended to buy materials and find workers to do it, and it can be completed in one day.
Yes, but that has to be slotted, and it is troublesome to bury the line in the groove. >>>More
The bath bomb itself has a protective cover, which has a protective effect. It has nothing to do with the ceiling material – but always be mindful when using it!
Yes, the downlight can be punched into the inside, just in the position of the roof, if you are about 4 cm, the best headlight is like a rect of this ceiling-mounted modern wrought iron headlight, the best.