Can paint on the surface of furniture products slow down the release of formaldehyde?

The plane can be planed or sandpapered, the groove groove is not easy to get, the paint stripper is added to the sandpaper grind, however, the old paint is not visible to the naked eye, that can only be painted with mud, if you want to brush the water color background, varnish, the effect may not be good, because the old paint penetrates into the wood, will not draft the water color background, the surface can not be seen, the bottom color plus varnish, the effect may be a flower face, be cautious.

First of all, the paint damage is smoothed with sand, if the home has a hard injury, fill it with wood ash laid by sand, if the hard injury area is too large, you can find another wood and use sand to make some wood ash down. Then fill it with wood ash and 502 glue, 505 will harden immediately, and continue to sand with sand until it is flat. If it is a log, you need to draw the wood grain, clean the furniture with a towel, and then use an eyebrow pencil or pencil of the appropriate color to draw the original wood grain. >>>More

Most of the reasons are that the dust removal of the topcoat room is not in place, and there are fine particles falling on the surface of the paint, and the topcoat room must maintain a dust-free environment.

There may be two situations to cause such a situation: one is the problem of light, from different positions, the color will be different under the influence of light; Another situation is that the wood has a color difference, so even if it is the same color, there may be color difference in different positions. I hope it can help you, and I hope to adopt it

The white color will definitely turn yellow after a long time, and even after repairing, it will still be like this, and there is no way to avoid it.