How about precautions for buying a toilet

1. Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and feel that the glaze and the feel of the body are very delicate, which indicates that the quality of the toilet is better. If it is a low-grade toilet, the glaze and blank on its surface will be rough, the color will be dull, and small holes will be found under the illumination of the light.

2. When choosing, you should also reach into the dirty part of the toilet with your hand and touch whether the inside is smooth. If it feels rough to the touch, it means that there is no glaze inside, and such a toilet is prone to water leakage. The sealing gasket of the toilet should be made of rubber or foamed plastic, which has strong elasticity and good sealing performance.

3. Because of the high temperature of the high-end toilet during firing, it meets the requirements of all-porcelain, so it will feel heavy in the hand. The firing temperature of the low-end toilet is low and the time is short, so it does not meet the requirements of all-porcelain.

4. Whether the design of the pipeline is scientific and reasonable has a great impact on the flushing effect of the toilet. In general, you should test flushing the toilet before buying it. In the formal standard, in the case of less than or equal to six liters of water, the toilet bowl should be able to flush out at least five water-filled ping-pong balls on average for three flushes.

5. The water absorption rate of the toilet bowl fired at high temperature is very low, so it is not easy to suck in sewage and produce peculiar smell. However, some low-end toilets have a high water absorption rate, and when they are sucked into sewage, they are easy to emit unpleasant odors and are difficult to clean. Over time, cracks and water leaks will occur.

When choosing, you can gently tap the toilet bowl with your hands, if the knocking sound is hoarse, not crisp and loud, then such a toilet is likely to have internal cracks, or the product is not cooked.

1. Observe whether the glaze of the toilet is smooth, consistent in color, and there can be no cracks and burrs; Then gently tap the toilet bowl with your hand, the high-quality toilet will make a crisp sound, if the sound is dull, it is not recommended to buy. When purchasing, also pay attention to whether the merchant provides trademarks, warranty cards, certificates of conformity, and so on.

2. The flushing method of the direct-flush toilet is relatively simple and rude, and it is not easy to cause toilet blockage or backwater in the later use. You can also reach into the sewer pipe with your hand to see if there is glaze, if not glazed, the later use is likely not to play the role of anti-odor, we can not only listen to the words of the merchant when purchasing.

4. The position of the toilet water storage is called the water seal, according to the relevant regulations, the height of the water seal is 50mm, and the toilet seal of some high-end brands is generally about 55-60mm, so you need to observe it carefully when you buy.

5. The siphon toilet has a good sales volume on the market, but due to its high pipe direction, it is more wastewater when flushing, generally about 8-9 liters. Therefore, it is key to choose a water-saving toilet as much as possible, and the amount of water will not exceed 6 liters in one flush.