-
Anonymous users2024-01-24How big is the pit spacing not enough 400 is not enough to put 300 is not enough 300 is not enough Suggestion.
One is to change the sewer from downstairs to the sewer normal property should be able to manage the second is to knock off part of the wall after the toilet is pasted After the bricks are pasted, let the toilet recess a little third, the ground is slightly smashed with a toilet shifter Move a little This is the most convenient, but it is not recommended to use it This is not recommended to use the toilet shifter The caliber is slightly smaller, I am afraid that the water will not be so smooth in the future.
Fourth, how much is the difference between the hole spacing, the normal difference of three or four centimeters, and the difference is fine, and the general toilet is reserved for drainage, which is 110 tubes, and the lower mouth of the poop body is about two inches, and the difference is three or four centimeters, no problem.
-
Anonymous users2024-01-23Install a shifter. 15 yuan each. Available at the bathroom shop.
-
Anonymous users2024-01-22Toilet drains.
The distance between the center and the wall is the toilet pit distance. Generally, there are 300 mm, 350 mm, 400 mm, etc. Only by choosing the right pit spacing can you choose the right toilet. When choosing a toilet, if decorated.
When you are ready to paste the tiles, you need to measure the pit distance after the tiles are pasted, otherwise it will be troublesome if the toilet is not installed when you buy it. So how to measure the distance of the toilet pit? The method of measuring the pit distance is actually to measure the length from the middle of the drainage pipe to the wall, and the measurement method of horizontal and vertical rows is the same.
How to measure the distance of the toilet pit, first of all, the toilet.
It is divided into two water outlets: ground row and horizontal drain, the horizontal row can only be installed with a straight flush toilet, and the floor row can choose to install a flush toilet or a siphon according to the pipe structure.
ToiletHow to measure the toilet pit distance, pay attention here, because the tile has a thickness, so it will affect the length of the pit spacing, if the manufacturer's toilet is marked as 400 mm pit spacing, basically around 380 mm, the manufacturer generally takes 20 mm as the reserved thickness of the tiles.
>1. How to measure the distance of the toilet pit, first of all, do a pre-measurement when there is no tile, and measure the approximate size. Then memorize this size and go to the market to see the toilet.
2. Bathroom.
Paste tiles, wall tiles, floor tiles.
Paste it all. Plug the drains.
Mouth. At this point, you can measure the exact toilet pit distance.
3. How to measure the distance between the toilet pit and expose all the blocked sewer openings, use a tape measure.
Measure the distance from the tile wall to the middle of the sewer.
4. If you are afraid that the measurement will not be accurate, first use a tape measure to measure the distance from a wall to the edge of the sewer, and then measure the diameter of the sewer. The previous number plus the sewer radius is the exact pit spacing.
5. Generally, the distance between the toilet pit of the general brand is 30 cm or 40 cm. There are also a few toilet brands with 35 cm pit spacing toilets.
6. By selecting the toilet brand in advance, when it is time to buy, inform the merchant of the specific measurement data and you will buy the toilet with the correct pit distance. If the rules are just right, then choose the same toilet, and the toilet will be close to the wall. If the actual rule is between two toilet specifications, you should choose the one with a small size, and the large size will not fit.
How to measure the distance of the toilet pit, you can measure the distance from the center of the toilet sewer pipe to the wall according to different drainage methods when measuring.
Is the pit spacing of 350 the original wall before the renovation? If it is the original wall, after the wall tiles are pasted at 350 pit distance, the toilet with 300 pit spacing is just right, if it is the size of the tiles with a toilet with 300 pit spacing is a few centimeters away from the wall, if you can't accept this distance, you can use a shifter to displace a small distance!
1. Is the distance between the floor drain and the wall smaller? >>>More
You can use a shifter, according to the empty distance of 10 cm, the ground is partially heightened, and the PVC elbow is used to change the distance between the drainage holes or directly install a squatting toilet. >>>More
You can buy a toilet with a pit spacing of 35 cm, the general imported brand toilet pit spacing specification is 40 cm or cm, and the domestic brand specifications are more complete, you can buy a pit spacing of 35 cm, so that there is no problem when installing the tiles as long as the tiles are thicker. So you can consult a consumer salesperson when you buy.
The mainstream toilet on the market is 305 and 400 meters from the wall hole, so experienced plumbers will add 20 mm, or 325 or 420 holes, in addition to the thickness of the plastering and tiling. But if there is a problem with the construction, it will lead to the wrong distance, if the above two holes are not compliant, the toilet of individual manufacturers still has 500 hole spacing, pick one yourself, find a suitable one, it is really not suitable and can only be changed, it is very troublesome.