Can I repaint furniture that has already been painted?

Updated on furniture 2024-08-26
5 answers
  1. Anonymous users2024-01-24

    You can wipe the cabinet clean first, and then sand it a little with fine sandpaper to refresh the paint. Remember that if there was a drum in the past, be sure to remove it.

  2. Anonymous users2024-01-23

    Look at this problem from another angle: if you don't know if you can do this, it proves that your paint knowledge and technical level is not high, and it is foreseeable that even if you really like the color you choose, the effect after you refresh the paint may not be good - because the color cannot express its beauty alone, but is attached to the tangible furniture as a harmonious whole. Combined with the paint technology, the result is likely to be an ugly, ugly, rough and shoddy look at the paint – not at all what you had envisioned it to be!

    At that time, it will be difficult to change back to the original state!

    I know it's hard for you to like this answer, but it's just kind advice from a friend you don't know, hehe

  3. Anonymous users2024-01-22

    Use fine sandpaper to sand it first, because after you use it for a while, a layer of oil and other contaminants adheres to the surface of the furniture, and direct painting will affect the even adhesion of the paint.

  4. Anonymous users2024-01-21

    It should be OK It's already been said upstairs.

    Look at the chemistry of lacquer, what was used before, what is used now, or will it be reflected.

  5. Anonymous users2024-01-20

    OK. But you have to rub the rubbing that you have brushed before. Otherwise, it will have a bad effect on the new brush1

Related questions
4 answers2024-08-26

It is best to wash off the paint below with thinner, and then use sandpaper sand to smooth the color you want, you can also directly use sandpaper to smooth the old paint sand to refresh the color, if you choose the latter, you had better get a small piece to try, in case your original paint and the current paint are not a series of reactions, if you don't react, you can follow the latter operation, my mobile phone typing is very tired, brother.

2 answers2024-08-26

If it is directly attached, it may not be secure.

Shake off the paint with sandpaper (at least one layer) and clean it before pasting. >>>More

2 answers2024-08-26

To paint the cement wall, to treat the base layer, first of all, it is necessary to carry out dealkalinization treatment, you can use 5% oxalic acid dilution to clean the wall, and then wash it with water, in the batch of putty, and then polish the putty, you can paint the wall.

2 answers2024-08-26

Rub a cloth dipped in a little olive oil.

1 answers2024-08-26

It is very convenient to make white paint, and it is now popular to make white paint. Specific method: 1: >>>More