-
Anonymous users2024-01-24Fixed-length wood section: double sawing machine to form hexagonal, multi-piece circular sawing machine, soaking piece, fixed floor thickness, soaking pool soaking wood chips, modifying, stacking rack, air drying, drying (equal stacking), precision forming, manual assembly into a large hexagon, precision forming, simultaneous opening of hexagonal groove, sanding, roller primer, topcoat, inspection and grading, packaging and warehousing.
Generally, the double-tongued solid wood floor can be laid directly on the ground, if your solid wood floor groove is very tightly spliced, it can be laid directly, no problem.
Yes, it is to use a nine-centimeter board or blockboard to make a base layer and then lay it directly on top and then nail it around, there are two basic ways to pave it: the dislocation method and the herringbone (also called T-shape) method.
According to statistics, more than 40% of the causes of floor complaints are caused by improper paving. Gao Zhihua, executive deputy director of the Flooring Committee of China Timber Circulation Association, introduced that the quality of the floor is not only limited to the floor itself, but also the paving of the floor has become an important part of measuring the quality of the flooring products. There are four main categories of civil indoor flooring in the market: solid wood flooring, parquet flooring, laminate flooring, and bamboo flooring. >>>More
1. I-shaped (one-half paving method). The I-shaped floor paving method is relatively common, which will look neat and symmetrical, and the visual effect is very good. After the half-paving method is laid, the short seams of the two floors are located between the upper and lower floors, which gives the impression of an I-beam, and the joints are interlaced. >>>More
Now the mainstream paving method.
The one-half paving method is to cut off one-half of the floor and lay a full one-third of the paving in this way. It's the same as above. >>>More