-
Anonymous users2024-01-241. I-shaped (one-half paving method). The I-shaped floor paving method is relatively common, which will look neat and symmetrical, and the visual effect is very good. After the half-paving method is laid, the short seams of the two floors are located between the upper and lower floors, which gives the impression of an I-beam, and the joints are interlaced.
Comparatively speaking, this paving method looks rather rigid.
2. Three-six-nine paving method (one-third paving method). The 369 paving method actually looks similar to the I-shape, but the short side of the floor is located on the long side of the position is different, located in the upper and lower two floors of one-third of the position, this kind of joint as a whole looks like a ladder, and it looks relatively three-dimensional.
3. Herringbone. This method of paving is still more popular in traditional European families, which is an elegant collage style, and this style is also very suitable for modern families.
4. Fishbone spelling. The paving method of fishbone and herringbone is also very similar, but in fact, there is still a little difference, that is, the middle seam of the fishbone splicing is aligned, and the herringbone splicing will have a sense of staggered in the connection. If you want to be from the process point of view, the fishbone will be relatively complicated, because the two short sides of the floor must be cut at 45°, and the beveled edge of the floor needs to be neatly laid when paving.
-
Anonymous users2024-01-231. The size of the keel can not be too thick, otherwise it will affect the use of space, and the general thickness is 4.
2. Cement nails should not be used, but should be hammered with electricity and then driven into the ground with wooden wedges and screws.
3. The keel wooden fang will not move left and right after installation, therefore, there is no need to fix it with cement mortar around it, so that the floor will not be arched or tiled deformed due to insufficient maintenance time.
4. For home installation, foam pads and 9mm plywood can be used, if you want to use it, you should use 12cm 18cm plywood, and cut it into 4 6 pieces, and nail it around the well-punching keel and board surface.
Due to the different specifications and quality of solid wood floors currently sold on the market, the most obvious is the different lengths, so it is recommended to try to buy a length of no more than 60cm and a width of no more than 60cm when laying solid wood flooring. Although the long one is easy to assemble, the long one is easy to skew, warp, and easy to deform, while the short solid wood floor is not easy to warp, and the gap between the boards, the combination and other aspects are all right.
-
Anonymous users2024-01-22The installation of composite wood flooring or wooden flooring starts from one end of the room, and extends to the other end of the room, because it is necessary to consider leaving a certain expansion coefficient (heat or moisture) for the floor, it can not be strictly pressed against the wall, and it is necessary to leave a little gap, if you do not install the buckle, not only after the floor expands, it will be uneven on the wall to affect the appearance, and there will be ash and dirt. Therefore, the general installation should be installed with buckles. There are also many types of buckles, some plastic and some metal.
The service life is not the same, which can be considered comprehensively.
-
Anonymous users2024-01-21How to lay solid wood flooring? The method steps for laying solid wood floors on the home floor are very detailed!
The biggest difference between solid wood flooring and laminate flooring lies in its structure, composite wood flooring is a composite structure with high surface wear resistance and good moisture-proof performance; The solid wood floor feels good and feels luxurious after paving, but it is often easy to deform after a long time. Both of them have their own characteristics, but composite wood flooring due to its unique advantages, coupled with the selection of materials from fast-growing forests, can protect the natural resources of the environment to the greatest extent, so it is welcomed by many consumers around the world, especially environmental protectionists. Since the birth of laminate flooring in 1985, the sales volume has been rising rapidly, and by 1998 it had reached 100 million m2, and it is likely to become the most important material for floor decoration in the near future. >>>More
Generally, the double-tongued solid wood floor can be laid directly on the ground, if your solid wood floor groove is very tightly spliced, it can be laid directly, no problem.
Yes, it is to use a nine-centimeter board or blockboard to make a base layer and then lay it directly on top and then nail it around, there are two basic ways to pave it: the dislocation method and the herringbone (also called T-shape) method.
According to statistics, more than 40% of the causes of floor complaints are caused by improper paving. Gao Zhihua, executive deputy director of the Flooring Committee of China Timber Circulation Association, introduced that the quality of the floor is not only limited to the floor itself, but also the paving of the floor has become an important part of measuring the quality of the flooring products. There are four main categories of civil indoor flooring in the market: solid wood flooring, parquet flooring, laminate flooring, and bamboo flooring. >>>More
Now the mainstream paving method.
The one-half paving method is to cut off one-half of the floor and lay a full one-third of the paving in this way. It's the same as above. >>>More