-
Anonymous users2024-01-24Hello, the long PVC gusset is dismantled like this; First of all, you see if the PVC board and trimming corners are made of glass glue when installing, and if so, cut it with a utility knife. Then insert a flathead screwdriver or utility knife into the last and penultimate gaps, gently swing up and down, and after a while, the last PVC board will be loose, you will push the board to the left or right of the trimming corner, and there will be one side down, and then grab the side with both hands, gently press down, use a little force, pull, and it will come out. If you dismantle the board inside, you will need a Phillips screwdriver, because the mother seam of each PVC board will be self-tapping screws, first under the self-tapping screws, and then slowly disassemble them, so as not to break them.
Finally, open the smoke pipe hole, first put the removed plate according to the direction, (be sure to press the direction) Oh, and then make a mark where you need to open the smoke pipe hole, and then put the purchased smoke pipe vertically at the mark, use a paint pen to draw a circle along the smoke pipe, and then use the hole opener to open the hole. After doing a good job, install it according to the original path, and lay glass glue around it, just do it. Hope I can help you, hehe.
Is it better to have an aluminum gusset or a PVC gusset for the bathroom ceiling? Listen to what hydrotalc has to say.
PVC material is a kind of plastic decorative material, is the abbreviation of polyvinyl chloride material, PVC (Polyvinyl Chloride, referred to as PVC) resin is a thermoplastic polymer polymer polymerized by vinyl chloride monomer (Vinyl Chloride Monomer, referred to as VCM). It is made of polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, modifier, etc., through mixing, calendering, vacuum blister and other processes. PVC is an amorphous polymer containing microcrystals with a crystallinity of 5%-10% (melting point 175 degrees). >>>More
PVC plastic gusset, although PVC board can also be used as a ceiling material in the living room, is mainly used in the bathroom or kitchen, the price is relatively cheap, about dozens of yuan per square meter, light weight, waterproof, moisture-proof, mothproof. There are many patterns in the flowers, and most of them are plain. When selecting this kind of material, pay attention to the fact that there should be no cracks and scratches on the surface, the tongue and groove, the wedge is flat, and the gusset with a crisp sound is knocked on the board surface by hand. >>>More
You're going to do it in that space.
Suspended ceilings, gypsum board. >>>More
PVC gusset is also the plastic board we often see, PVC gusset is light in weight, waterproof, moisture-proof, heat insulation, not easy to burn, no vacuuming, easy to clean, more suitable for kitchen, bathroom ceiling decoration. But compared to metal ceilings, PVC ceilings are slightly inferior. How about a PVC ceiling? >>>More