Is mahogany furniture with white leather good?

"White bark" is the common name, and the canonical name is "sapwood", that is, the part of the bark outside the heartwood of the tree.

To be precise, sapwood can be used on mahogany furniture, but conditionally according to the industry standard, that is, the standard of "Dark Precious Hardwood Furniture" (QB T2385-2008).

There are certain ways to use sapwood without use.

There are two ways to "not use sapwood": one is to choose wool without sapwood when selecting materials. The other is that there is sapwood in the wool part, but the sapwood is dug out and the same heart material is used to make up for it, although it is not as good as the whole material, but after all, it is all heartwood, and the material is not fake.

"Conditional use" must be used within the scope permitted by the national standard, and once the sapwood is conditionally used, it must be indicated in the product instructions and sales contract:

1. It is noted that the implementation of this furniture is the QB T2385-2008 standard ("Dark Precious Hardwood Furniture" standard).

2. After the material (material), add a bracket and write "with a small amount of sapwood".

When it comes to mahogany furniture, white leather is an unavoidable topic. Although the standard for "Dark Precious Hardwood Furniture" (QB T2385-2008) has long been finalized, there are still many people who debate it. According to standard mahogany furniture, sapwood can be used, but it must be strictly limited to the standard range.

The standard "Dark Precious Hardwood Furniture" (QB T2385-2008) concludes that the material on the front of the product should be borderless, and the area content of the sapwood on the surface of other parts should not exceed 1 10 of the surface area of the part (excluding sapwood with a width of less than 8 mm). Insect-eaten wood should be treated and repaired with pesticides, and wood that is still eroded by live insects should not be used.

According to the standard, the sapwood of mahogany furniture can be used, but it must be strictly limited to the standard range.

Some mahogany furniture manufacturers find it unreasonable because when buying mahogany raw materials, the whole wood is purchased, so white leather should also be counted as part of mahogany, and white leather furniture will be sold at a lower price (illegal operations can be very expensive), allowing more people to own their own mahogany furniture. However, more people in the industry believe that while white leather is part of mahogany, it has a completely different texture, color, nature, and heartwood. Although it is made from the same tree, it cannot be said to be a material.

Therefore, qualified products must be counted according to the standard. What's more, it is not a qualified product, as long as they bring a little white edge.

Mahogany furniture is made of wood sawn into panels, and many mahogany heartwood materials have a regular cylindrical shape, so when the panels are opened and removed, there will always be white skin residue on the edges, and the material has very strict requirements for the size of the mahogany material. If even a white edge is removed, it will be a huge waste of materials and will have a huge impact on the price of finished furniture.

Mahogany furniture can not use white leather, only the core material can reach enough hardness, white leather is the fastest place for insect erosion and decay. Using white leather to make mahogany furniture is all about cutting corners.

Theoretically, it is not good, just like a piece of wood that has not scraped the skin clean, the white bark is basically a section between the bark and the core, generally we do not use it to make furniture, it is estimated that mahogany is more expensive, and the side is not very good to use to make furniture.

White leather is shoddy, the size of the wood is not enough, there is no clean raw materials, and special attention should be paid to the purchase of furniture.