The family is ready to buy a wardrobe, but I don t know how to distinguish between solid wood and bo

Solid wood can be identified using wood grain and scarring. The easiest way is to buy products from famous brand manufacturers. The products of excellent manufacturers often carry out strict drying treatment on solid wood wardrobes, so that the moisture content of wood is kept within a limited range, so that the wardrobe is not easy to deform, and the after-sales service is guaranteed.

In addition, famous manufacturers use plates that meet the requirements of environmental protection for panel wardrobes, and most of the veneers have been perfected, and good edge sealing makes the gas diffusion of panel wardrobes reach the lowest level, which does not pose any damage to the human body. When purchasing, you can open the cabinet door or drawer to smell it, if there is a strong irritating smell, it is mostly formaldehyde exceeded, and it is not suitable to buy.

The quality of the process and the price of solid wood directly affect the price of solid wood wardrobes. Therefore, when choosing a solid wood wardrobe, the first thing to look at is the material. For example, the price of mahogany varies depending on the species.

The higher the grade of solid wood used, the better the craftsmanship, and the higher the price of its wardrobe. Generally speaking, in terms of price, the price of the same kind of wooden, all-solid wood wardrobe is much higher than the price of imitation solid wood and wood-based panel combined wardrobe. However, the price of some panel wardrobes with good workmanship and novel styles may also far exceed the price of solid wood wardrobes with rough workmanship.

The key to identifying whether a cabinet door or partition is made of solid wood lies in the wood grain and scars. For example, a cabinet door, the appearance looks like a pattern, then according to the position of the pattern change, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is a pure solid wood cabinet door. In addition, looking at the scar knot is also a good way to identify pure wood:

Look at the location of the scarred side, and then look for the corresponding pattern on the other side. In addition, another trick to identify a panel wardrobe is to carefully observe the hinge slots and holes, where the internal structure is exposed, so that you can see whether you are using particleboard or MDF.

How to distinguish whether it is solid wood or board type mainly depends on several aspects: such as whether the wood grain is spliced (to see whether the texture of the front and back is correct; It can be seen by looking at whether the texture of the four sides and the texture of the panel are continuous), whether it is hollow when knocked up, and the corners and the situation inside.

On March 18-20, the first China Wardrobe Exhibition at Guangzhou Jinhan Exhibition Center (a wardrobe feast will be staged, welcome to visit.

The weight is also different, the solid wood is very heavy, and if it is a solid wood finger joint, it can be seen that the finger joint part is like a finger crossed together.

The solid wood is very heavy, and the texture of the wood can be clearly seen to be different from the veneer and the splicing, and the different shades of color can be clearly seen on the wood. And the teeth on the upper floor, you can clearly see it, you go to buy the time to ask him for the solid wood deck and he will tell you. Solid wood is available in solid wood splicing and whole solid wood.

Generally, furniture and these things are relatively expensive, and you don't dare to fake, you can see it if you look at it if you find someone who knows a little bit about it. Keep receipts and other documents when you buy them, and just open a warranty note and keep them

1. Look at the weight. Solid wood is very heavy.

2. Eye texture. The veneer and the splicing can clearly see that the texture of the wood is different3. Look at the eye color. If you make the color, you can clearly see the different shades of color on the wood.

4. Look at the tooth joint.

Solid wood is available in solid wood splicing and whole solid wood. Generally, furniture and these things are relatively expensive, and you don't dare to fake, you can see it if you look at it if you find someone who knows a little bit about it. Keep receipts and other documents when you buy them, and just open a warranty note and keep them