-
Anonymous users2024-01-24Here are a few reasons why.
The water pressure is not enough. The electrons are not strong enough.
The solution is as follows. 1。Unscrew the inlet pipe.
Open the valve to check whether the water flow is not strong.
2。Replace the battery.
If you can't solve it, you can only call a professional.
Don't risk it yourself.
-
Anonymous users2024-01-231. It is the problem of the bathroom gas stove itself 2. The natural gas pipeline is blocked or insufficient.
-
Anonymous users2024-01-22Will there be water accumulation in the pipeline or the buried trachea is small.
-
Anonymous users2024-01-21The water pressure is not enough, is the water valve blocked.
This situation is obviously not a problem with the water heater, but is caused by the use of more hot water in the bathroom and the accumulation of dirt in the hot water pipe. >>>More
Embedded ? I guess there is no battery, so I bought 2 and replaced it.
If you can't catch fire because the shower is blocked by the mud and sand debris in the water pipe, resulting in insufficient water flow, you can remove the shower first and then light the fire.
First of all, you see whether the hot water pipe in your kitchen is the same as the hot water pipe of the water heater (whether it branches from above), if it is not connected, no hot water is certain, if it is connected and there is no hot water, there are two situations: one is that the hot water pipe may be blocked, and the other is that the mixing switch is broken.
Observe whether the valves and water pipes in the kitchen are unreasonable, resulting in low water pressure.