The flush of the toilet is getting smaller and smaller, what s going on

There is an aerated device at the faucet spout, remove it and clean it up. There is also a pipe from the angle valve, just remove it and clean it up.

Abstract: If you are in this situation, it is because there is too much dirt and dirt in the sewer, you can pour more hydrochloric acid into it to corrode it, and it will be fine. >>>More

The community where you live should be the new community, there are impurities in the water supply pipeline, under the impact of the water flow, blocked at the elbow of the pipeline, the more and more, resulting in the pipeline blockage, especially the hot melt pipe in the welding of the pipe thinning, it is easier to make the water flow smaller, you can find a longer iron wire or steel wire forward to continue to test, to see if the water flow has become larger!

First, check to see if the water pressure in your home is lower than before. >>>More

According to the maintenance experience, it should include the following aspects: first, check whether the system pipes of the wharf water supply are seriously aged and have dripping leakage, which should be the most difficult to check; Second, check the ceramic lid of the toilet bowl, check whether the buttons inside are resilient and sensitive, the spring resilience may deteriorate after a long time, resulting in the continuous addition of water, but the speed of adding water is very slow and not easy to detect; Third, check whether there is a jam in the float, you can try to press the float, the pumping dock has been used for a long time, and the spring inside the whole machine is easy to rust and get stuck anywhere. The above three aspects are the main ways for my own family check-up, and I hope to help my brother.