-
Anonymous users2024-01-241.Determine the installation position, and after aligning the ground sewage nozzle with the sewage outlet at the bottom of the flush toilet in the ground drill hole, draw the position of the fixed hole at the bottom corner of the toilet on the ground according to the peripheral size of the toilet base, and punch the hole with a percussion drill. The depth of the eyelets is about 5 cm.
2.The base of the toilet bowl hammers the steel expansion bolt into the ground drilled hole, puts the expansion bolt into the bottom corner of the toilet bowl and tightens the nut to put the toilet in place. The toilet drain outlet should be tightly connected with the preset sewage pipe on the ground and sealed.
3.Before installing the water tank, you need to make an eye on the wall according to the height of the water tank, and after the hole is built, the same way steel expansion bolts, fix the water tank on the wall, add a nylon washer, and tighten the screws.
4.After the connecting pipe flush toilet tank is installed, the next step is to install the connecting pipe between the water tank and the toilet base, and the connecting pipe between the water inlet pipe and the bottom of the water tank. And it should be noted that a water inlet control valve should be added at the connection of the water inlet pipe.
This is very simple, pad down, put down the pad and tighten it with a mother, it is best to use a foam pad, with a rubber pad, easy to leak.
<>< In addition to the above measurements, it is also necessary to pay attention to the fact that the button has a top press type and a side infiltration Qi Annihilation press type, and the water tank and toilet bowl are divided into one type and split type. There are several kinds of tank accessories, and it is not easy to make a mistake if you bring old accessories with your limbs when you buy them. Image quoted from image. FYI.
It depends on what kind of one you buy, some are directly put into the toilet, covered with the lid of the bucket and disinfected for a while, and some are put into the water tank for flushing and disinfection, and the general detergent has instructions, which can be consulted, pressed into a block with a hydraulic press, which can be directly put into the water tank of the flush toilet, which can automatically play the role of deodorization, descaling, sterilization, disinfection, etc.; Long service life, a piece weighing 40 45 grams, can be used for more than a month.
First of all, you must determine what accessories are broken, go to the building materials store to buy some accessories and replace them yourself, provided that you need to turn off the water source.