Kitchen coin redemption code for online kitchen?

Yes, if you can't change it, then it may be that your computer may not be able to detect the hard disk (symptoms of not detecting the hard disk: the hard disk information is not displayed in the IDE detection when you boot up) so that it will be displayed before entering the system""Reboot and select proper boot device or insert bootmedia in selected boot device and press a key" Disk detection failure reason:

1) The motherboard BIOS is out of power and you can't remember the hard disk information, if your system date is incorrect, it is likely to be this reason. Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk.

2) The quality of the IDE cable is not good or it is not plugged in firmly. Solution: Change the IDE cable or plug the IDE cable into another IDE slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

3) The hard drive is faulty and may need to be replaced.

4) If your computer can detect the hard disk every time and cannot enter the system, reformat the hard disk completely and reinstall the system.

5) Also set the hard disk to boot to try (is it wrong).

6) There is also a situation where replugging and unplugging the memory and cleaning the gray can also solve the problem (sometimes caused by it).

7) If you can't solve it yourself, it is recommended to overhaul it.