Is the toilet water part OK

The old toilet water parts only need to match the new toilet in terms of the fitting model to be used. Old-fashioned toilet fittings are generally single-button type, large float type is more, large float type is larger, occupies more space, and single-button flush valve has no water-saving function. Generally, there is no fixed replacement cycle for toilets at home. >>>More

Toilet water fixtures are actually quite simple. Water fixtures are all about controlling the amount of water your toilet use. There are two functions. One is the large row, that is, the one that rushes the stool. One is a small chop, that is, a urine rush. It plays a role in saving water. It depends more on the specific water operation.

First, the quality of the water in the toilet is quite good, much stronger than the material bought later, so there is no need to change it. However, when installing, it is necessary to layer glass glue underneath to prevent water leakage or excessive moisture. >>>More

The toilet tank water can not be closed, to see the water level of the water tank first, the water level is high and the water leaks from the overflow port, generally the water inlet valve failure can not turn off the water, the low water level is generally the failure of the rubber plug of the flush valve, and it may be that the pontoon assembly is improperly installed so that the pontoon can not float up and down flexibly, clean up the debris, adjust the appropriate position, and there is the pontoon, the position is adjusted too high, and there will be such a problem, to pinch the adjustment card tightly, or the pontoon will be lowered or the rack is lifted up to lower the pontoon.

The engineering plastic part can withstand a certain high temperature. >>>More