The wall next to the bathroom, the middle and upper part of the second bedroom, was damp and moldy

Updated on Bathroom 2024-08-20
2 answers
  1. Anonymous users2024-01-24

    If there is water seepage, dampness, peeling and other conditions on the wall of the bathroom, it is generally caused by water leakage in the bathroom. The most important thing now is to find the cause of the water leak:

    1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;

    2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to use the kitchen and bathroom waterproof slurry to do the waterproofing again, so as to fundamentally solve the problem.

  2. Anonymous users2024-01-23

    If the bathroom is not waterproofed, or the waterproof cutting corners are unqualified, it is recommended to find a decoration construction company to coordinate.

Related questions
3 answers2024-08-20

It shows that the bathroom waterproofing is low when you decorate your home, and the waterproofing on the wall must be high.

3 answers2024-08-20

It was supposed to be a leak in the upstairs bathroom, leaking down the walls. Because there is no water source in the elevator shaft.

2 answers2024-08-20

Aluminum alloy frame fixing increases the cost, by the bathroom side, should first reserve the position of the glass to paste the wall tiles, then use white ash to modify the incision, and then use the glass to suction the glass to install it, and finally, by the side of the room, with 90 degrees of wood lines or other metal lines to close, glue, to ensure firmness. If you still want to save money, you can use cement to batch a certain amount, and finally apply paint, which is seamless and saves money.

1 answers2024-08-20

Have you changed the sewer pipe (put the water pipe in the wall) usually so that the water will be shaded.

1 answers2024-08-20

If the bathroom is leaking from the waterproof layer, rather than the upper and lower water pipes, it can be repaired without smashing the ground. The maintenance method is very simple, that is, use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom again, so that the water does not enter the ground and flows directly from the waterway. 2. If it is a problem with the upper and lower water pipes, and the water pipes are underground, you need to consider smashing the floor, but it is not necessary to redecorate the bathroom. >>>More