Now make the bathroom waterproofing with that kind of material to talk about in detail! I don t know

Regarding the waterproofing of the bathroom, I can give you the following suggestions::

1.The first thing to pay attention to when doing waterproofing in the bathroom is the choice of waterproof materials, and it is recommended that you can directly use the waterproof slurry in the kitchen and bathroom, which is specially developed for the yin and yang angles that are easy to seep into the kitchen and bathroom, wear pipes, sanitary ware, floor drain peripherals, etc., so the special materials are dedicated, the pertinence is stronger, and the waterproof effect is of course better.

2.The construction of waterproofing should be carried out in accordance with the requirements of the manual, the proportion of waterproof materials, the standard thickness and height of construction, etc., so as to ensure a good waterproof effect.

3.After doing a good job of waterproofing, it is necessary to do a good job of sprinkling and maintenance in the later stage, and places with direct sunlight need to be covered and covered.

4.The base surface before waterproofing must be cleaned, there can be no oil and dust, etc., and it must be sprinkled with water to moisten, but there must be no stagnant water.

5.After the waterproofing is completed, remember to do a 48-72 hour closed water test to check whether there are any leaks in the waterproof construction and whether the waterproof function is normal.

There are two main types of polymer membrane and polymer coating for household use, and the membrane is mostly used for roofing and indoor waterproofing, and polymer waterproof coating is the first choice. There are also many kinds of waterproof coatings, although the effect of polyurethane waterproof paint is good, but the smell is heavy, and the application procedure is also cumbersome, so it is not recommended for exquisite interior decoration. It is recommended to use JS series waterproof paint to clean the bathroom base, paint the waterproof paint twice, and turn it from the ground to the wall, pay special attention to the surrounding pipes, and paint them many times to prevent water seepage at the root of the pipe.

The first batch of cement mortar once in a cement oil, after drying, brush three times waterproof, install the water pipe, bedpan, fill the inside in the cement slurry bottom and then do two waterproof brushes three times, as for the waterproof material you can choose from the store, the owner will tell you a variety of materials, the quality of your choice.