How to add a drain to the bathroom

Updated on Bathroom 2024-08-01
5 answers
  1. Anonymous users2024-01-24

    If you want to add a sewer in the bathroom, you can buy plastic straight pipes with a diameter of about one and a half inches and elbows and other accessories on the ground, and connect them to the original sewer from the new sewer point as needed. Go underground and dig a trench to bury the pipe, or lead to the original sewer.

  2. Anonymous users2024-01-23

    If you need to add a drain to the bathroom, you can use a sewage lifter to solve the problem, which is suitable for situations that cannot be reached by a neutral drainage network but must be discharged. It can be connected to a standard toilet with four additional inlets for showers, wash basins and other toilet water facilities, including toilet inlets.

  3. Anonymous users2024-01-22

    If you need to add a lower spout to the bathroom.

    zhi can be solved with a sewage dao lifter, which is suitable for use in neutral drains.

    Occasions where the net cannot be reached but sewage must be discharged. It can be connected to a standard toilet with four additional inlets for showers, wash basins and other toilet water facilities, including toilet inlets. Directly connected to the rear toilet, you don't have to worry about squeezing the toilet space.

    When using the Microboy, choose a rear toilet with the center of the rear drain 18 points from the floor. Microboy uses floor drainage technology, which does not require slotting, which means that there is no need to damage the structure of the house, and there is no need to drill holes downwards for drainage, so it will not affect the ceiling of the downstairs neighbor's house, and naturally it will not affect the neighbors.

  4. Anonymous users2024-01-21

    There are several ways to do this: 1. The most troublesome and most formal one: Punch a hole downstairs If you dig the ground at the bottom and connect it with the original pipe; 2. Connect a tee from the drain of the washbasin and then branch it; 3. From the middle of the drain cover, it can also be a drainage hole.

  5. Anonymous users2024-01-20

    The toilet can be relocated with a sewage lifting pump, and he is a built-in.

    After pressing the inner toilet button, the pump will start automatically, and then the dirt will be crushed, and the crushed dirt will be lifted and discharged through a small pipe. In the end, it was drained to the sewer of my room, which would not affect the downstairs neighbors at all. I have installed one at home, and the brand is an imported brand from France, called SFA, which is still good.

    And in addition to connecting the shower room, the toilet and wash basin can also be connected. It can be connected with one pump and is easy to install.

Related questions
1 answers2024-08-01

The balcony generally has little water, and if you want to increase the washing machine, you will directly consider the washing machine drainage, and you don't need to consider the floor drain.

8 answers2024-08-01

How to deal with the general toilet with only one sewer pipe? That is, there are no two, both are one sewer pipe.

1 answers2024-08-01

The sunken bathroom can also be better to change the pipe, the drainage downstairs is not easy to do, to discuss with the downstairs, but also with the approval of the property department to change the drainage branch.

1 answers2024-08-01

1. All of them are mainly considered for perforation transformation of the structure of the washbasin cabinet. >>>More

6 answers2024-08-01

Leave a drain on the floor level of the bathroom to prevent water from flowing to other rooms under special circumstances. When decorating, remove the closure and add a floor drain.