-
Anonymous users2024-01-24If it is really deep, you can use a pipe fitting called inner and outer wire to connect the nozzle Attached drawings generally sell plumbing pipe fittings.
Hello. If this situation has not happened before, but only appeared later, then it can basically be considered to be caused by water seepage from the pipe, but the degree of water seepage is not too serious. If it takes a long time, there will be traces of water on the wall downstairs, and it will continue to spread and expand, and there may be slow dripping water on the top surface. >>>More
It is normal to paste wall tiles first, and then floor tiles is better.
pVC package will be better, once the problem of leakage water is complicated with bricks, it is not in line with your current situation, the ceiling can use PVC or aluminum and other metal gussets, the latter is more costly, but easy to clean! Experience!
Lay the floor tiles first, but first pave the floor tiles, the floor tiles are laid for at least a period of time after the paving is idle, the bricks can not be stepped on, the workers can not be asked to pave the wall tiles, if it is not dry and solid, the floor tiles are uneven. And if you stick the floor tiles first, there will be cement and sand falling on the floor tiles when the wall tiles are pasted, and the hardness of the sand is large, and the surface of the floor tiles will be scratched during construction; In addition, it is not easy to do hygiene; After the floor tiles are applied, the floor drain is opened. The cement slurry flow is easy to enter the floor drain. >>>More
After removing the old wall tiles in the bathroom, they should re-waterproof, so as to prevent the walls from getting wet.