-
Anonymous users2024-01-24The weight of an ordinary toilet is about 50 pounds, and a good toilet is about 100 pounds.
How to buy a toilet:
Water tank flush toilet storage tank leakage in addition to obvious dripping sound can be determined, generally not easy to find, a simple inspection method is to drip blue ink in the toilet tank, stir well to see if there is blue water flowing out of the toilet outlet, if there is a leak in the toilet. As a reminder, it is better to choose a higher height for the tank, so that the impulse is good.
Glaze pay attention to the glaze of the toilet, the glaze of a good quality toilet should be smooth and smooth without blistering, and the color should be saturated. After inspecting the glaze of the outer surface, you should also touch the sewer of the toilet, if it is rough, it is easy to cause sagging in the future.
The heavier the weight toilet, the better, the weight of an ordinary toilet is about 50 pounds, and a good toilet is about 100 pounds. The density of the toilet bowl with large weight is high, and the quality is relatively passable. A simple way to test the weight of a toilet bowl: Pick up the lid of the cistern with both hands and weigh it.
It is best to have one drain hole at the bottom of the toilet at the outlet, and now many brands have 2-3 drain holes (according to different calibers), but the more drain holes, the more it affects the punch. The water outlet of the bathroom is divided into lower drainage and horizontal drainage, and the distance between the center of the drain and the wall behind the water tank should be measured, and the toilet of the same model should be bought to "sit at the opposite distance, otherwise the toilet can not be installed." The outlet of the horizontal drain toilet should be equal to the height of the horizontal drain, preferably slightly higher, in order to ensure that the sewage is smooth, and the 30 cm toilet is the middle and lower drainage
20 to 25 cm for the rear drain toilet; The distance between 40 cm and more is the front flush toilet. If there is a slight error in the model, the water will not be smooth.
If the diameter of the large-diameter sewage pipe and the inner surface is glazed, it is not easy to hang dirty, and the sewage discharge is rapid and powerful, and the blockage is effectively prevented. Test method, put the whole hand into the toilet mouth, generally can have a palm capacity is optimal.
The national standard for indoor formaldehyde is, it is best to test it yourself, and the results will be quickly obtained with a detector, hundreds of dollars, or long-term use, if it exceeds the standard, put some Nanojie natural nano silicon indoors, and the effect of removing formaldehyde is 5 times stronger than that of activated carbon.
This is not easy to say, only the test to know, Shijiazhuang formaldehyde designated enterprise Shijiazhuang better than better environmental protection engineering Co., Ltd. senior engineer said: indoor air formaldehyde pollution main sources are: furniture and fabrics, wood products filler, building sources, detergents, cosmetics and personal products, etc., which are mainly man-made panels. >>>More
Now the new national standard stipulates that the formaldehyde emission of children's furniture is less than milligrams per liter. My child is from Songbao Kingdom, and the formaldehyde release is only milligrams per liter, which is relatively safe.
The national standard is that if it exceeds the standard seriously, it cannot be lived. If the material is poor, the amount of formaldehyde released is relatively large, which will pollute the entire indoor air, so it is recommended to treat it better. In order to completely remove formaldehyde and other harmful substances in the room, we must first find the source of pollution release, that is, where the harmful substances come from; The second is to choose the right product and completely solve the problem from the source. >>>More
Solid wood flooring is not measured by formaldehyde, as if it is relying on benzene; >>>More