How to install gusset ceiling led rectangular lights

Make a 300*300 wooden frame with a wooden square, and this wooden frame should be connected with the ceiling keel. The installation of aluminum gusset LED lights is like this: Generally, the gusset is equipped with a special keel, and this wooden frame should be connected and fixed with the ceiling keel. It is best to install the gusset after it is fixed (that is, after the keel frame is laid).

First, the elastic line.

According to the floor elevation level, use the ruler vertical vector to the ceiling design elevation, bounce on the roof on the keel position line, and bounce the elevation line of the roof on the wall. >>>More

According to the voltage, it can be divided into two types: high voltage and low voltage, high voltage is indeed easy to install, but it is one meter and one cut, and the softness is not high, and the lighting effect is not as good as the low voltage light bar. The low voltage is generally 12V or 24V, which is highly safe, so it is more suitable for home decoration, especially in families with children and the elderly, of course, the premise is that the quality of the products you buy must be excellent. In addition, the low-voltage light strip can be cut according to the actual size, such as 3528 120 lamp meters, 12V light strip can be accurate to a unit, so the personalization is stronger, and the home decoration effect is more perfect. >>>More

When installing an integrated ceiling bath bomb on the gusset ceiling, you must first test the bath bomb lighting, and the specific operation steps are as follows: >>>More

I remember that there is an Opple integrated top lamp that can be installed, but it is more expensive than the ordinary Opple card, this lamp is equipped with a bracket, which can be installed on the top of the plastic steel plate, and the card type can actually be installed, but you have to buy an aluminum buckle keel.