-
Anonymous users2024-01-24It should be that the power supply at the power supply of the water heater is connected to the power supply at the toilet light, which should be the problem of the installation and wiring of the water heater, and if you want to change it, you need to reconnect the power.
The machine is fine, it's the waterway. When you turn off the water, the problem is that the water that begins to flow back is in place according to the normal direction, then the water-gas linkage valve will be flushed open, and the water heater will start, but it will stop immediately, about a few seconds. This is the phenomenon of backwater. >>>More
There is no water heater in the bathroom, only a small water meter, if you want to use hot water, you must have a source of hot water, for example, if you install a solar energy or install a water heater, so that you can have hot water.
OK! One is enough! Just ventilate.
Then the person will not cause suffocation >>>More
The kitchen is equipped with a small kitchen treasure.
Fix the hanging plate first, install the electric water heater, and connect the ground wire, neutral wire and live wire on the fixed plate. The ground wire is connected to the ground wire of the home, and the color is yellow-green; The live wire is connected with the live wire of the leakage protector, and the color is brown-red; The zero line is docked with the zero line of the leakage protector, and the color is blue-green. >>>More