The wall near the bathroom is moldy, what is the reason?

Updated on Bathroom 2024-08-15
6 answers
  1. Anonymous users2024-01-24

    The mold on the wall of the bathroom is generally caused by the water of the bathroom infiltrating into the wall, and the back wall is not waterproof and moisture-proof, and the water evaporates when the wall decoration material is evaporated.

    Moisture infiltrates the wall

    One is to infiltrate the wall through the gap in the tile, which is manifested as mold or peeling off of the wall finish on the back of the middle and upper part.

    The second is the leakage through the joint between the bathroom floor and the wall, which is manifested as moldy and damp on the back of the root of the wall.

    When there is water leakage in the first case, it is recommended to carry out the spraying construction of hook joints and waterproofing agent on the waterfront surface of the bathroom wall, and then scrape off the finishing material of the entire wall to carry out the construction of the moisture-proof layer.

    When there is water leakage in the second case, it is recommended to dig up the bathroom and re-do the waterproofing as a whole, especially the yin and yang corners, and carry out additional reinforcement construction of the waterproof layer.

  2. Anonymous users2024-01-23

    What should I do if the wall is moldy? A few common wall problems to share with you.

  3. Anonymous users2024-01-22

    Most of the moldy walls are due to water leakage, and the bathroom is too wet, so you can consider installing an exhaust fan!

  4. Anonymous users2024-01-21

    The bathroom door cover and wall are damp and moldy, and the designer will teach you how to deal with it in order to solve it completely.

  5. Anonymous users2024-01-20

    The moldy wall means that the waterproof treatment of the wall of your bathroom is not done well, resulting in water seepage on the wall, and mold will naturally occur after a long time. It can be used to remove mold with MEIBOSS wall mold remover, and it has a certain waterproof function.

  6. Anonymous users2024-01-19

    The walls of the bathroom in the home are moldy, and the reasons may be:

    The waterproofing of the wall, ground or corner of the wall and ground connection of the bathroom is not done, and the water in the bathroom leaks into the wall, so that the wall is damp for a long time, and it is easy to mold in the high temperature season in summer;

    There is leakage of water pipes and water pipe joints buried in the wall, which makes the wall damp;

    Water leaking from faucets, valves, wash basins, and toilet tanks causes moisture on the walls;

    Water or leakage upstairs can also cause dampness on the walls downstairs;

    The downstairs wall may be damp and may seep to a certain height of the upstairs wall.

Related questions
2 answers2024-08-15

1.Exterior wall water seepage: If the wall paint is moldy caused by exterior wall water seepage, the first thing to solve is the problem of wall water seepage. As long as you make sure that the wall is no longer seeping water, you can ensure that the wall paint is no longer moldy. >>>More

17 answers2024-08-15

1. Water seepage on the wall caused by pipeline leakage. Water seepage on the wall caused by leaking pipes is a relatively common cause. You can look at the construction drawings and check the direction of the water pipes at home. >>>More

5 answers2024-08-15

There are generally two causes of water leakage on the bathroom wall, namely water pipe leakage and waterproof layer leakage. These two are the most common reasons, and now people only care about the beauty when decorating, and do not pay attention to the safety of waterproofing at all. After the decoration is completed, it is easy to leak the water pipe and the waterproof layer. >>>More

1 answers2024-08-15

There are many reasons for water seepage on the bathroom wall, and the new waterproof layer is ineffective or the water pipe leaks will cause water seepage on the wall. When you are not sure about the cause, you can first test whether it is a problem with the water pipe, and the test method is relatively simple: turn off all the faucets and see if the water meter is moving. >>>More

1 answers2024-08-15

It is possible that the wall is seeping water, otherwise it is the reason for returning to Nantian, put some desiccant in the bathroom to absorb moisture and dry, reduce humidity, and also stay away from the breeding of bacteria.