-
If you replace the faucet in this case, you need to remove the sink and faucet together, remove the faucet, and then install the new faucet on the old sink and re-state the sink with glass glue. A glass glue is about 10 yuan.
-
Well, what I said upstairs is very right, if you need to disassemble the faucet, you need to remove the faucet and the sink together, and then reassemble it when you buy a suitable faucet.
Use a small screwdriver to pry open the red and blue plastic cover (that is, the thing that represents the sign of hot and cold water), you can see a screw with a slotted slot inside, very small, you have to look at the light obliquely to see it, use a screwdriver to loosen it (rotate to the left is to loosen it), at this time, as long as the handle on the top is lifted up, after the handle is taken out, you can see a large nut, this nut may be tight, you need to use a large wrench or pipe wrench to loosen it (to the left rotation is to loosen), This allows you to see the ceramic spool. >>>More
Answer: 1. Find the main valve of your water pipe and turn it off. 2. Buy a faucet with the same number as your faucet. >>>More
Room faucet dismantling.
1. The most important step before disassembling the faucet is to close the main valve, otherwise it will lead to the spray of tap water, not to mention wasting water, and also increasing the burden of cleaning the kitchen. >>>More
Tools: a pair of pipe wrenches and a pair of adjustable wrenches. >>>More
Step 1: Prepare your tools first: screwdriver, wrench, pliers. >>>More