-
The calculated balcony area is not divided into high-rise and low-rise buildings, and is calculated according to the national standard of "Code for Calculation of Construction Area of Construction Projects", numbered GB T50353-2013. The following are the calculation provisions.
3 0 21 The balcony in the main structure shall be calculated according to the horizontal area of the outer perimeter of the structure; The balcony outside the main structure should be calculated according to the horizontal projection area of its structural bottom plate1 2 area.
-
The floor area of the balcony is calculated as half of the planar projection.
-
Are the exterior balconies of the structure and the 80 cm high balconies of the railings all counted as the floor area?
Ordinary balconies are calculated as half the area of the area. >>>More
1. For unenclosed balconies of residences that meet the following standards, the construction area shall be calculated according to half of the horizontal projection of the enclosure structure. If exceeded, the excess part is calculated as the entire floor area. Enclosed balconies are counted for the total floor area regardless of whether they meet the following criteria. >>>More
According to the current construction area calculation specification: the balcony is calculated according to 1 2 regardless of whether it is closed or not; A balcony refers to a balcony with an unroofed roof or a floor height (roof) greater than 5 meters, and the floor area cannot be calculated. Another: >>>More
1. The balcony is enclosed.
The so-called closed balcony refers to the balcony equipped with glass or plastic steel windows. However, it must be a closed balcony with planning approval documents or construction drawings approved by the planning department, and the area can be fully included in the construction area. >>>More
1. The code for calculating the construction area of construction projects (GB T50353-2005) was implemented on October 1, 2005, which stipulates that the balcony of the building should be calculated according to 1 2 of its horizontal projection area. This is a national norm, and the calculation of floor area should comply with its provisions. >>>More