What to do if the toilet flush pressure becomes smaller

1. You can copy to increase the amount of water, ratio.

Such as putting bottles in the water tank.

2. Adjust the screw of the water inlet valve clockwise to let the water level rise, and pay attention to the water at least 10mm away from the overflow nozzle of the drain valve.

3. Adjust the water level of the water tank appropriately. If it is a slow flow from the water tank to the toilet, check whether there is something blocking the water outlet from the toilet tank to the flush.

In general, Ren.

Where to pump the toilet bucket, 4-5 years of use will be fouled, bai originally smooth pottery du porcelain surface zhi scale, it seriously affects the drainage ability of the toilet dao, resulting in the inability to flush in time, slow drainage, this is usually caused by the use of the process, generally the only longer way to appear this phenomenon is to replace the toilet, even if it is descaled in various ways, the siphon elbow inside the toilet can not be completely removed, there is a temporary improvement, This will continue to occur after a while.

First of all, it is forbidden to urinate in the toilet, even if it is necessary or unavoidable, it is necessary to flush out the urine in time, do not be afraid of water, and secondly, you should not throw the paper into it after unraveling it; In addition, there is a subsection on the installation, that is, the toilet outlet must leave a certain amount of water, if after flushing, the toilet outlet is always only a little bit of water left, and even the outlet has not overflowed, so that when used, it will be directly stained with dirt on the ceramic surface, which is extremely unhygienic and troublesome.

As long as you pay attention to the following points, it can be used for more than 10 years or more, except for general wearing parts.

1] Urinate frequently.

2] Do not throw away paper paper.

3] Wash frequently, but do not use sulfate acid, which will directly lead to damage to the ceramic surface.

In general.

Bai, any flush toilet, DU use zhi4-5 years will be fouled, the original light dao slippery ceramic surface out of the internal fouling, capacity seriously affects the drainage ability of the toilet, resulting in the inability to flush in time, slow draining, this is usually caused in the process of use, generally the only longer way to appear this phenomenon is to replace the toilet, even after various ways to descale, the toilet internal siphon elbow can not be completely removed, there is a temporary improvement, This will continue to occur after a while.

First of all, it is forbidden to urinate in the toilet, even if it is necessary or unavoidable, it is necessary to flush out the urine in time, do not be afraid of water, and secondly, you should not throw the paper into it after unraveling it; In addition, there is a subsection on the installation, that is, the toilet outlet must leave a certain amount of water, if after flushing, the toilet outlet is always only a little bit of water left, and even the outlet has not overflowed, so that when used, it will be directly stained with dirt on the ceramic surface, which is extremely unhygienic and troublesome.

As long as you pay attention to the following points, it can be used for more than 10 years or more, except for general wearing parts.

1] Urinate frequently.

2] Do not throw away paper paper.

3] Wash frequently, but do not use sulfate acid, which will directly lead to damage to the ceramic surface.

What should I do if the toilet flush is too small? Teach you a trick that you can solve at home!

The line from the toilet tank to the urinal, which is supposed to be running through the toilet, is clogged with limescale and sediment. The resulting water flow is not smooth, the pressure is reduced, and the flush of the toilet is smaller. It is recommended that you clean it up, but it is very laborious, some places can not reach the hand, and it is easy to break the sewer, please clean it carefully

Under normal circumstances, any flush toilet, 4-5 years of use will be fouled, the original smooth ceramic surface of the fouling, it seriously affects the drainage capacity of the toilet, resulting in the inability to flush in time, slow drainage, which is usually caused in the process of use, generally the only longer way to appear this phenomenon is to replace the toilet, even if it is descaled in various ways, the siphon elbow inside the toilet can not be completely removed, there is a temporary improvement, and this phenomenon will still appear after a while.

First of all, it is forbidden to urinate in the toilet, even if it is necessary or unavoidable, it is necessary to flush out the urine in time, do not be afraid of water, and secondly, you should not throw the paper into it after unraveling it; In addition, there is a subsection on the installation, that is, the toilet outlet must leave a certain amount of water, if after flushing, the toilet outlet is always only a little bit of water left, and even the outlet has not overflowed, so that when used, it will be directly stained with dirt on the ceramic surface, which is extremely unhygienic and troublesome.

As long as you pay attention to the following points, it can be used for more than 10 years or more, except for general wearing parts.

Urinate frequently. Don't throw away paper sheets.

Wash frequently, but do not use sulfate hydrochloric acid, which will directly lead to damage to the ceramic surface.

1. You can increase the amount of water, such as putting bottles in the water tank.

2. Adjust the screw of the water inlet valve clockwise to let the water level rise, and pay attention to the water at least 10mm away from the overflow nozzle of the drain valve.

3. Adjust the water level of the water tank appropriately. If it is a slow flow from the water tank to the toilet, check whether there is something blocking the water outlet from the toilet tank to the flush.