-
Anonymous users2024-01-24Don't be afraid of the flush pressure, because the toilet tank fittings can withstand the maximum pressure of the water. Normal tap water is not that high. However, the premise is that the toilet water parts must be a regular manufacturer. The quality should be good.
If the water pressure is too high, you can lower the inlet valve a little to save some water.
-
Anonymous users2024-01-23Fill the drink bottle with water and place it in the water tank, preferably so that it does not touch the accessories in the tank. This saves water and reduces water pressure.
-
Anonymous users2024-01-22Adjust the drain valve and use a clamp to hold the water in the pipe.
-
Anonymous users2024-01-21Find a professional.
Reason 1: The flange interface is installed when it is biased, and the sewer flow rate is reduced. >>>More
The toilet tank water can not be closed, to see the water level of the water tank first, the water level is high and the water leaks from the overflow port, generally the water inlet valve failure can not turn off the water, the low water level is generally the failure of the rubber plug of the flush valve, and it may be that the pontoon assembly is improperly installed so that the pontoon can not float up and down flexibly, clean up the debris, adjust the appropriate position, and there is the pontoon, the position is adjusted too high, and there will be such a problem, to pinch the adjustment card tightly, or the pontoon will be lowered or the rack is lifted up to lower the pontoon.
The design is like this, there is no way.
Lower the float in the reservoir to reduce the amount of water stored.
In our daily life, many people will have the phenomenon of insufficient toilet water pressure in their homes, so what is the reason for the lack of toilet water pressure, and what should we do when we encounter this problem? >>>More