-
Anonymous users2024-01-24Simple, it is flat with the bottom of the beam, and it looks like one. Look better.
-
Anonymous users2024-01-23The original ceiling had beams, and now the ceiling height of the hanging beam is flat at the bottom of the beam.
-
Anonymous users2024-01-22THE FALLING HEIGHT OF THE CEILING IS THE SAME AS THE HEIGHT OF THE BEAM, FOR EXAMPLE, THE HEIGHT OF THE BEAM IS 240MM, THEN THE FALLING HEIGHT OF THE CEILING IS 240MM
There are furniture, there are clothes, and the wardrobe is better, just take the clothes, what depends on the homonym, reluctantly, not parting, happy, sweet and sweet.
It is not difficult to do this, as long as the horizontal position of this ceiling is correct. Use an infrared level to make a horizontal line, or use a plastic horizontal tube to make a horizontal line; First, find the horizontal position at a height of about 1 meter on the wall, and then use the ink fountain to pop up the horizontal line; According to this horizontal line, synchronously raise it to the elevation position of the ceiling, and pop out the ink fountain line, and the ceiling can be done according to this line.
No, a suspended ceiling is a suspended ceiling, and a downward hanging refers to a size of the suspended ceiling downwards.
It may be a mobile or Unicom signal receiving device, which used to be installed on the surface, but now it is basically placed in the ceiling and cannot be seen.
Only through the ceiling in the original structure to make a suspension bar down. Hang the lamp on the sling. The effect does not matter. >>>More