What should I do if the bottom of the overall shower room is going to leak

Updated on Shower room 2024-08-31
4 answers
  1. Anonymous users2024-01-24

    1. It is to avoid hitting the movable door below, so as not to cause the movable door to fall off;

    2. Pay attention to the regular cleaning of slide rails, pulleys and sliders, and add lubricant (lubricating oil or lubricating wax);

    3. It is the adjusting screw of the slider that is adjusted regularly to ensure the effective bearing and good sliding of the slider on the movable door.

    The movable door of the shower room is not smooth and the door is not smooth

    1. Check whether the pulley is broken, whether the track is deformed, and replace it if so;

    2. Check whether the pulley is tightened, whether the left and right sides of the door are parallel to the slide, and the side is tightened and adjusted;

    3. Whether there is a foreign object stuck in the movable door wheel and glass;

    4. If none of the above is the above, it is necessary to check whether the upper and lower guide rails are installed in place, check whether there is any deviation between the upper and lower holes of the glass, and lubricating oil can also be added to lubricate the door more smoothly.

  2. Anonymous users2024-01-23

    There are companies that specialize in waterproofing, or find a decoration company, and they will add a layer of waterproof material to the ground.

  3. Anonymous users2024-01-22

    It's useless, only to change the base!

  4. Anonymous users2024-01-21

    You can give it a try.

    If it doesn't work, ask the brand for after-sales.

    They should have a way.

Related questions
3 answers2024-08-31

Glue or redo waterproofing.

8 answers2024-08-31

What is your shower room made of? It can be waterproofed with spray-type waterproof material to avoid water leakage. If you find that leak spot, you can use the Plug King.

1 answers2024-08-31

Pay attention to where the water comes from, and give a picture to help you come up with an idea.

4 answers2024-08-31

It should be a foreign body in the sewer, which is not easy to dredge, and the whole is more troublesome, it is best to remove it, remove the bathtub and clean the pipe, so as to solve the root of the problem. Hope it helps. This is indeed more troublesome, the overall shower room disassembly, waterproof is difficult to guarantee, the amount of disassembly and assembly industry is also very large

1 answers2024-08-31

1. After all the shower rooms are installed, they need to be coated with glass glue all around, and they will be used for 24 hours, otherwise they will definitely leak.